The bigger ones have PHYs for USB HS, USB-C (5Gbps) and 10/100M Ethernet integrated (!). And their development environment (Mounriver Studio) isn't too bad - I didn't had the immediate urge to port everything to CMake/VSCode.
But they need some kind of pin planning tool. It's awful to use the datasheet and find the correct pin functionalities and their mutual exclusions... STM32 mastered this with their STM32CubeIDE tool: select a feature (like USART1) and the right pins light up - alternate pins are easy to locate.
They also should clean up their license mess on OpenWCH (their GitHub page). Lots (all?) of their HALs are Opensource - but the right version with right SPDX tags are often a bit hidden.
Though STM32Cube has a very different approach, handles lots of mutually exclusive features and peripherals and a bunch of extra stuff for controlling code gen IIRC.
What an amazing tool: it loads and displays the kicad native files in a simple web browser, but moreover - you don't have to be the intermediary, cloning some repo and then uploading the individual files to a website.
I wish that existed for more weird binary formats. Altium have 365 but you have to have signins to use it, and they cost named-user seats.
It seems that a person can also click to select an object on the board, and then use the "zoom to selection" button near the bottom-right of the viewport, to bring things up to a more-visible size and place [some of] them on-screen.
Vertical panning is then accomplished by rolling the scrollwheel. Horizontal scrolling can be accomplished by tilting the scrollwheel on a mouse that is so-equipped.
(Perhaps bizarrely, I was unable to discover any other way to pan.)
FWIW - On my laptop (track pad), I expected to click-drag or ctrl-drag to move it, but on a track pad it's two-finger swipe to move it left/right. then pinch zoom.
Sorry, but I am not installing KiCAD or cloning a repo just to look at a schematic. Since the beginning of time electronics hobbyists have been posting schematics in bitmap or pdf format. It should be in the readme.
I already had KiCad installed, so I uninstalled it to see how long it would take. It took me 51 seconds to clone the repo and reinstall KiCad. I thought this wasn't too bad.
But the joke was on me — when I tried to open the PCB file, KiCad said: "KiCad was unable to open this file because it was created with a more recent version than the one you are running. To open it you will need to upgrade KiCad to a version dated 12/29/2024 or later."
So I now think your position is reasonable. Also I think I need to upgrade Debian.
I'd agree with you in the past, when KiCAD didn't work as nicely with git. And for a professional project, I'd still at least keep snapshots of every milestone with "compiled" output.
But for a hobby project I really don't see the need. It takes a few extra minutes to install KiCAD, clone the repo, and view the schematic at any point in time.
Sorry my friend - but embedding static PDFs in Git is my opinion an anti-pattern. The KiCad (or EDA) sources should be the single source of truth, with visuals generated/exported locally when needed.
If you don't like it.. well it's a free world and every engineer has it own preferences :-)
Neglecting a schematic is an anti-pattern. And I never said it had to be PDF. Besides, of all the crap people shove in Git repos, a simple bitmap that compresses well and conveys extremely useful information has to be the least offensive.
It's probably worth mentioning the 2400bps (300 bytes per second) LPC10 codec built into SoX. If you have SoX installed, try
rec -t lpc10 speech.lpc
and then speaking into your microphone for ten or fifteen seconds before you ^C it. Then play it back with
play speech.lpc
It will sound very robotic but pretty comprehensible, at least with an adult male voice in English, and it preserves a lot of the prosody and enunciation that is so hard to get out of speech-synthesis packages.
12KiB of data at 300 bytes per second would be 41 seconds of recorded speech.
Decoding the LPC10 data on the CH32V003 might be tricky. On amd64, running `make CFLAGS=-Os` followed by `ld -r -o tmp.o *.o` inside sox-14.4.2+git20190427/lpc10 yields a tmp.o with 25243 bytes of text (including .rodata, etc.) and 356 bytes of data. I'm not optimistic that RISC-V would compress that to fit inside the CH32's flash. And I find the code in that directory inscrutable; it's Fortran that's been compiled to C.
Still, it seems plausible that you could massage the LPC10 data into a format that something like Talkie would understand.
This is great. Missed opportunity for a low-pass RC filter on the speaker circuit - if you know you're driving an 8kHz sample rate, you can design your filter with that cutoff, and it'll sound way better (it'll get rid of the buzzy quality).
This may be essential if you're connecting it to an audio amplifier. I learned this the hard way by burning out someone else's very expensive tweeters with 31.25kHz PWM.
Nice work. Especially referencing the TI prior art of the Speak and Spell. This kind of synthesis was quite prevalent in the early 80s - school BBC Micros had a ROM which let you "*SAY" a phrase. Classic Macs had MacinTalk.
Even easier is the 1-bit DPCM codec used on the NES. Go up or down one step each sample depending on the next bit. You can't get a square wave out of it, only a triangle, but it has a nostalgic quality.
The NES DPCM runs at up to 33kHz, so it actually has double the bitrate of the 2-bit 8kHz encoding used in the article. If you run it at 16kHz to match the bitrate, it will sound much worse.
The sound in the video seems more sophisticated than TTS. It seems more like the result of analyzing a clip of digital audio, and turning it into a series of TTS phonemes.
Assuming SAM is a faithful port of the original, it converts text into phonemes according to a bunch of pronunciation rules.
I saw another audio project on the same microcontroller (family) posted a few days ago: ModPlayRISCV It plays a tracker MOD. using PWM with a low-pass filter.
It resamples/scales all samples at varying rate/volume into a ring buffer which gets fed to the PWM comparator by DMA.
Can you export the schematic and Gerber files to a PDF file? A lot of open source projects do this, and it makes it much easier to tell what's going on, with software pretty much everyone already has on their computer.
These CH32 mikrocontrollers are great and dirt cheap. I've build a small DC motor controller with them to control a toy robot: https://github.com/h0lad/MiniSpeedController
The bigger ones have PHYs for USB HS, USB-C (5Gbps) and 10/100M Ethernet integrated (!). And their development environment (Mounriver Studio) isn't too bad - I didn't had the immediate urge to port everything to CMake/VSCode.
But they need some kind of pin planning tool. It's awful to use the datasheet and find the correct pin functionalities and their mutual exclusions... STM32 mastered this with their STM32CubeIDE tool: select a feature (like USART1) and the right pins light up - alternate pins are easy to locate.
They also should clean up their license mess on OpenWCH (their GitHub page). Lots (all?) of their HALs are Opensource - but the right version with right SPDX tags are often a bit hidden.
A pin planner- without the code gen of STM32Cube- would be doable as a website.
I made a basic one for the RP2350- https://rp2350b.pinout.xyz/
Though STM32Cube has a very different approach, handles lots of mutually exclusive features and peripherals and a bunch of extra stuff for controlling code gen IIRC.
Nothing irks me more than "check out my neat-o PCB design" and there's no schematic.
It's kicad which means you can use kicanvas to view it. For example: https://kicanvas.org/?github=https%3A%2F%2Fgithub.com%2Fh0la...
What an amazing tool: it loads and displays the kicad native files in a simple web browser, but moreover - you don't have to be the intermediary, cloning some repo and then uploading the individual files to a website.
I wish that existed for more weird binary formats. Altium have 365 but you have to have signins to use it, and they cost named-user seats.
I use KiCAD so I know it well. Unfortunately that site is in alpha and I am unable to zoom in to see the schematic clearly.
Use Ctrl+mousewheel to zoom.
(Unfortunately, it does not zoom on the cursor but on the center of the screen).
It seems that a person can also click to select an object on the board, and then use the "zoom to selection" button near the bottom-right of the viewport, to bring things up to a more-visible size and place [some of] them on-screen.
Vertical panning is then accomplished by rolling the scrollwheel. Horizontal scrolling can be accomplished by tilting the scrollwheel on a mouse that is so-equipped.
(Perhaps bizarrely, I was unable to discover any other way to pan.)
FWIW - On my laptop (track pad), I expected to click-drag or ctrl-drag to move it, but on a track pad it's two-finger swipe to move it left/right. then pinch zoom.
For me control-mousewheel zooms and shift-mousewheel pans horizontally.
pebkac error
Oh.. I love this web tool. Thanks for showing!
Feel free to have a look at the "pcb" folder.
Sorry, but I am not installing KiCAD or cloning a repo just to look at a schematic. Since the beginning of time electronics hobbyists have been posting schematics in bitmap or pdf format. It should be in the readme.
I already had KiCad installed, so I uninstalled it to see how long it would take. It took me 51 seconds to clone the repo and reinstall KiCad. I thought this wasn't too bad.
But the joke was on me — when I tried to open the PCB file, KiCad said: "KiCad was unable to open this file because it was created with a more recent version than the one you are running. To open it you will need to upgrade KiCad to a version dated 12/29/2024 or later."
So I now think your position is reasonable. Also I think I need to upgrade Debian.
I'd agree with you in the past, when KiCAD didn't work as nicely with git. And for a professional project, I'd still at least keep snapshots of every milestone with "compiled" output.
But for a hobby project I really don't see the need. It takes a few extra minutes to install KiCAD, clone the repo, and view the schematic at any point in time.
Sorry my friend - but embedding static PDFs in Git is my opinion an anti-pattern. The KiCad (or EDA) sources should be the single source of truth, with visuals generated/exported locally when needed.
If you don't like it.. well it's a free world and every engineer has it own preferences :-)
Neglecting a schematic is an anti-pattern. And I never said it had to be PDF. Besides, of all the crap people shove in Git repos, a simple bitmap that compresses well and conveys extremely useful information has to be the least offensive.
Maybe an idea for the next project: setting up a CICD chain which auto-generates them for releases. Will take a piece of your critics with me.
That's an excellent idea!
Can you change the polarity (direction) of the DC motors with this board?
Yes. The DRV8837 has a pin for the direction. It's a H-Bridge.
It's probably worth mentioning the 2400bps (300 bytes per second) LPC10 codec built into SoX. If you have SoX installed, try
and then speaking into your microphone for ten or fifteen seconds before you ^C it. Then play it back with It will sound very robotic but pretty comprehensible, at least with an adult male voice in English, and it preserves a lot of the prosody and enunciation that is so hard to get out of speech-synthesis packages.12KiB of data at 300 bytes per second would be 41 seconds of recorded speech.
Decoding the LPC10 data on the CH32V003 might be tricky. On amd64, running `make CFLAGS=-Os` followed by `ld -r -o tmp.o *.o` inside sox-14.4.2+git20190427/lpc10 yields a tmp.o with 25243 bytes of text (including .rodata, etc.) and 356 bytes of data. I'm not optimistic that RISC-V would compress that to fit inside the CH32's flash. And I find the code in that directory inscrutable; it's Fortran that's been compiled to C.
Still, it seems plausible that you could massage the LPC10 data into a format that something like Talkie would understand.
This is great. Missed opportunity for a low-pass RC filter on the speaker circuit - if you know you're driving an 8kHz sample rate, you can design your filter with that cutoff, and it'll sound way better (it'll get rid of the buzzy quality).
This may be essential if you're connecting it to an audio amplifier. I learned this the hard way by burning out someone else's very expensive tweeters with 31.25kHz PWM.
Nice work. Especially referencing the TI prior art of the Speak and Spell. This kind of synthesis was quite prevalent in the early 80s - school BBC Micros had a ROM which let you "*SAY" a phrase. Classic Macs had MacinTalk.
Another codec which might be interesting to try but is considerably more complicated is AMR, from GSM: https://en.wikipedia.org/wiki/Adaptive_Multi-Rate_audio_code...
Even easier is the 1-bit DPCM codec used on the NES. Go up or down one step each sample depending on the next bit. You can't get a square wave out of it, only a triangle, but it has a nostalgic quality.
The NES DPCM runs at up to 33kHz, so it actually has double the bitrate of the 2-bit 8kHz encoding used in the article. If you run it at 16kHz to match the bitrate, it will sound much worse.
You should be able to do it all on-device, check out SAM, the Software Automatic Mouth. The actual data in the *_tabs files:
https://github.com/ctoth/SAM/tree/master/src
The sound in the video seems more sophisticated than TTS. It seems more like the result of analyzing a clip of digital audio, and turning it into a series of TTS phonemes.
Assuming SAM is a faithful port of the original, it converts text into phonemes according to a bunch of pronunciation rules.
Interesting, though before clicking I thought the headline might be referring to a very poorly paid presentation about Marvel movies.
Ha, seconded. I hate how acronyms get repeated between domains. Makes for very confusing reading if you're not part of the in-group.
Could hang an i2c flash chip off that thing for more storage and still have enough IO pins for serial coms and a spare IO pin.
I saw another audio project on the same microcontroller (family) posted a few days ago: ModPlayRISCV It plays a tracker MOD. using PWM with a low-pass filter. It resamples/scales all samples at varying rate/volume into a ring buffer which gets fed to the PWM comparator by DMA.
https://github.com/cpldcpu/ModPlayRISCV
Programmers made 8 bit micros talk in the 1970s, using nothing but square wave pulses sent to the speaker.
> I considered a few encoding options for compressing the audio.
The presentation of this part seems extremely padded out to me, ironically enough.
Can you export the schematic and Gerber files to a PDF file? A lot of open source projects do this, and it makes it much easier to tell what's going on, with software pretty much everyone already has on their computer.
First I thought you made a lecture on MCUs which was available for viewing in exchange for $0.10
Then I thought you made a lecture on MCUs where the device was available for purchase generally for $0.10.
Then I thought with an MCU valued at $0.10 you generated speech
English... sigh
This is why I prefer μC
Although I guess that can also be confused with micro Couloumbs
Time flies like an arrow.
I like it too.
Fruit flies like a banana.
Sometimes it is one.
It has worse misreadings, it could be a cheap lecture on the "Marvel Cinematic Universe". (It's about cheap MicroController Units.)