> Elevator achieves performance on par with or better than QEMU's user-mode JIT emulation.
I am not sure what QEMU's JIT is doing (in its userspace wrapper), but I think it has a lot of room to improve.
In 2013 I wrote a x86-64 to aarch64 JIT engine that was able to run what was then Fedora beta aarch64 binaries and rebuild almost the entire aarch64 port of Fedora on a x86_64 Linux. I also made a reverse aarch64 to x86-64 JIT that worked in the same way, and for fun I also showed the two JITs managing to run each other in a loop back fashion: x86-64 -> aarch64 -> x86_64 in the same process.
The JIT I devised did a 1-to-many instruction and CPU state mapping with overhead that was somewhat 2x to 5x slower than what would be expected to native recompiled code. I later compared this with QEMU's JIT which seemed more in the range of 10x to 50x slower.
Unfortunately this was not under a open source license settings, so no code release to prove it.. :(
Yes, QEMU's JIT is a fairly easy target to beat. Notably if you are happy to specialize the design to "only x86 to aarch64" and "only usermode" there's quite a lot of gain to be made. QEMU's usermode support is a kind of "this happens to work" appendix to its system emulation support, and the overall JIT architecture is a "guest to intermediate representation to host" one that is great for supporting a dozen guest architectures and multiple host architectures, but means you can't really take advantage of properties of a specific guest/host pair like "x86 has fewer integer registers so we can hard allocate them" or "we know the fiddly floating point semantics always match if you put the aarch64 CPU into the right mode". Plus there's just more time put into "emulate new architecture feature X" in QEMU development than into "look at optimization opportunities to make it faster", because that's what the people who pay for development work care more about.
A 50x increase in the size of the .text section is enormous, but seems to be a reasonable price to pay for a fully-deterministic translation. The performance difference over emulation will outweigh the inconvenience of the size increase in many cases.
It's exciting to see that multithreading and exception handling are not impossible to support; they're just out of scope of this particular project.
I wonder if the next step is to then use heuristics to prune the possibility space and reduce the size of the binary (thus breaking the guarantees of the translation, but making portability of the binary practical).
Sounds like they tweaked an AI to get a minimal subset of accurate outcomes and started waving their hands for anything more complicated, realistic and ultimately generally useful. The larger problem-space is still an NP-complete problem. I guess if the data-centres become infinitely large, this problem can be worked around.
> Elevator considers all possible interpretations of every byte and produces a separate translation for each feasible one ahead of time [...] pruning only those leading to abnormal termination.
So any real program with the possibility to crash is pruned?
Presumably just set to a canonical crash in the lookup table of address-to-code; which still get you a crash, just not that of the directly-run invalid code.
This is neat. I haven’t looked into it, but I would think relative offsets could still be an issue, but it seems there must be some translation layer/mmu since the codegen will be different sizes anyway. This would impact jump tables and internal branches, primarily.
I mostly work on stuff from the 90s, but disassemblers make a lot of assumptions about where code starts and ends, but occasionally a binary blob is not discoverable unless you have some prior knowledge (pointer at a fixed location to an entry point).
I would think after a few passes you could refine the binary into areas that are definitely code.
I think self-modifying outside of JIT runtimes is a pretty rare thing these days compared to the 80s or 90s, .text sections are mostly RO these days and security requirements aren't going to decrease that.
Consider reading the linked article, where this is explicitly addressed:
> Self Modifying and JIT-Compiled Code. Elevator, like all fully static binary rewriters, does not support self modifying or just-in-time-compiled code.
So they don't have to handle the really hard case.
In x86 land, it's hard to find the instruction boundaries statically, because, for historical reasons going back to the 8-bit era, x86 nstructions don't have alignment restrictions. This is what makes translation ambiguous.
If you start at the program entry point and start examining reachable instructions, you can find the instruction boundaries. Debuggers and disassemblers do this. Most of the time, it works, but You may have to recognize things such as C++ vtables. Debug info helps there. There may be ambiguity. This seems to be about generating all the possible code options to resolve that ambiguity by brute force case analysis.
x86 doesn't have explicit code/data separation, which some architectures do. So they have to try instruction decoding on all data built into the executable. They cull obvious mistranslations. Yet they still have a 50x space expansion, someone mentioned. Most of those will be unreachable
mistranslated code.
You can't look at a static executable which uses pointers to functions and say "that data cannot possibly be code", without constraining what those pointers point to. That involves predicting run-time behavior, which may not be possible.
The certification angle is the most interesting part to me. Regulated industries (aviation, medical devices) often can't use JIT for exactly this reason, the code that runs has to be the code that was certified. Static translation that produces a signable binary is a real unlock there, code bloat notwithstanding.
I wonder: how relevant is this portion of the software industry? Because I’m guessing there is also no way they can apply LLms at scale, which is never discussed in the larger AI at work narrative
I think my comment conveyed the wrong sentiment, my bad.
I’m suggesting exactly this: there are extremely common cases in which deterministic software outcomes are needed/mandatory/regulated.
Way more often than we think, often in boring and solved but critical environments.
Yet the entire AI industry acts as if that is an afterthought or an unimportant edge case.
It is completely relevant, if you want reliable software that you use daily to continue running without a massive rewrite.
Before suggesting to use LLMs to completely rewrite this sort of software, there is a reason why compilers need to be certified to operate in safety critical environments. Not everything needs to use LLMs as the solution to a problem.
I would go as far to say that using an LLM in this context is the wrong solution and is irrelevant to critical systems. Maybe some here see everything as tokens and must solve everything in the form of using LLMs.
Rewriting a toy web app using LLMs from Javascript to Typescript is great, but isn't good for safety critical systems.
Safety critical software is mostly a compliance dance that incidentally produces artifacts with lower defect rates than usual. LLMs can help with safety critical code as long as a human signs their name that they are responsible for its behavior.
When I'm sitting in the plane that has CAS firmware, I'd like to think it wasn't written by an LLM and that my death in the case of a CAS failure isn't chalked up to "some engineer somewhere gets in trouble".
There probably already is generated code in there, only it was generated from UML. I don’t think that LLM generated code will be treated differently from the point of view of the relevant regulations.
I agree with you.
The question is: how the hell is this never discussed when assessing the economic potential of AI-driven disruption.
I ask because I have the impression that all the really relevant industries are resistent to the current narrative.
That said we had Claud helping bomb a school full of kids, you would guess the military would know better but no :/
The memory model by itself isn't, however Apple implemented it before Arm released an (incompatible) set of extensions that approach the problem at the instruction level instead of adding an Apple-style global TSO on/off switch in an IMPDEF register [0].
I thought Apple Silicon also has some extra hardware support for handling x86 flags emulation for Rosetta. But perhaps I’m remembering that incorrectly.
From the paper, Elevator currently supports only single-threaded binaries, does not support binaries using exception handling, has unsupported x64 extensions, and does not support self-modifying or JIT-compiled code. Slack is Electorn based, so t embeds Chromium and Node and depends on V8.
static translation is only possible when you assume no adversarial code AND mostly assume compiler-produced binaries. hand-rolled asm gets hard, and adversarial code is provably unsolvable in all cases.
I only read the abstract but I got the impression that their solution to this is they have both. They translate all the data as if it was code and if it gets called into they use the translation where if it gets read as memory they use the original.
Edit I found this in the paper
> Elevator sidesteps the code-versus-data determination altogether through an application of superset disassembly [6]: we simultaneously interpret every executable byte offset in the original binary as (i) data and (ii) the start of a potential instruction sequence beginning at that offset, and we build the superset control flow graph from every one of the resulting candidate decodes. Every potential target of indirect jumps, callbacks, or other runtime dispatch mechanisms that
cannot be statically analyzed therefore has a corresponding landing point in the rewritten binary. These targets are resolved at runtime through a lookup table from original instruction addresses to translated code addresses that we embed in the final binary.
> Elevator achieves performance on par with or better than QEMU's user-mode JIT emulation.
I am not sure what QEMU's JIT is doing (in its userspace wrapper), but I think it has a lot of room to improve.
In 2013 I wrote a x86-64 to aarch64 JIT engine that was able to run what was then Fedora beta aarch64 binaries and rebuild almost the entire aarch64 port of Fedora on a x86_64 Linux. I also made a reverse aarch64 to x86-64 JIT that worked in the same way, and for fun I also showed the two JITs managing to run each other in a loop back fashion: x86-64 -> aarch64 -> x86_64 in the same process.
The JIT I devised did a 1-to-many instruction and CPU state mapping with overhead that was somewhat 2x to 5x slower than what would be expected to native recompiled code. I later compared this with QEMU's JIT which seemed more in the range of 10x to 50x slower.
Unfortunately this was not under a open source license settings, so no code release to prove it.. :(
Yes, QEMU's JIT is a fairly easy target to beat. Notably if you are happy to specialize the design to "only x86 to aarch64" and "only usermode" there's quite a lot of gain to be made. QEMU's usermode support is a kind of "this happens to work" appendix to its system emulation support, and the overall JIT architecture is a "guest to intermediate representation to host" one that is great for supporting a dozen guest architectures and multiple host architectures, but means you can't really take advantage of properties of a specific guest/host pair like "x86 has fewer integer registers so we can hard allocate them" or "we know the fiddly floating point semantics always match if you put the aarch64 CPU into the right mode". Plus there's just more time put into "emulate new architecture feature X" in QEMU development than into "look at optimization opportunities to make it faster", because that's what the people who pay for development work care more about.
qemu is a TCG, not a translator. It's designed to work with n architectures which has limits.
A 50x increase in the size of the .text section is enormous, but seems to be a reasonable price to pay for a fully-deterministic translation. The performance difference over emulation will outweigh the inconvenience of the size increase in many cases.
It's exciting to see that multithreading and exception handling are not impossible to support; they're just out of scope of this particular project.
I wonder if the next step is to then use heuristics to prune the possibility space and reduce the size of the binary (thus breaking the guarantees of the translation, but making portability of the binary practical).
Sounds like they tweaked an AI to get a minimal subset of accurate outcomes and started waving their hands for anything more complicated, realistic and ultimately generally useful. The larger problem-space is still an NP-complete problem. I guess if the data-centres become infinitely large, this problem can be worked around.
/s /jk
50x isn't reasonable, it's a cache disaster. Any perf win from avoiding JIT gets eaten alive.
Only if it is all actually used at runtime; and presumably the vast majority of possible decoding starting points won't be.
> Elevator considers all possible interpretations of every byte and produces a separate translation for each feasible one ahead of time [...] pruning only those leading to abnormal termination.
So any real program with the possibility to crash is pruned?
Presumably just set to a canonical crash in the lookup table of address-to-code; which still get you a crash, just not that of the directly-run invalid code.
This is neat. I haven’t looked into it, but I would think relative offsets could still be an issue, but it seems there must be some translation layer/mmu since the codegen will be different sizes anyway. This would impact jump tables and internal branches, primarily.
I mostly work on stuff from the 90s, but disassemblers make a lot of assumptions about where code starts and ends, but occasionally a binary blob is not discoverable unless you have some prior knowledge (pointer at a fixed location to an entry point).
I would think after a few passes you could refine the binary into areas that are definitely code.
Can it handle self-modifying code?
Why only x86_64? It has more sense to convert 32-bit programs, like many old games.
I think self-modifying outside of JIT runtimes is a pretty rare thing these days compared to the 80s or 90s, .text sections are mostly RO these days and security requirements aren't going to decrease that.
Consider reading the linked article, where this is explicitly addressed:
> Self Modifying and JIT-Compiled Code. Elevator, like all fully static binary rewriters, does not support self modifying or just-in-time-compiled code.
So they don't have to handle the really hard case.
In x86 land, it's hard to find the instruction boundaries statically, because, for historical reasons going back to the 8-bit era, x86 nstructions don't have alignment restrictions. This is what makes translation ambiguous.
If you start at the program entry point and start examining reachable instructions, you can find the instruction boundaries. Debuggers and disassemblers do this. Most of the time, it works, but You may have to recognize things such as C++ vtables. Debug info helps there. There may be ambiguity. This seems to be about generating all the possible code options to resolve that ambiguity by brute force case analysis.
x86 doesn't have explicit code/data separation, which some architectures do. So they have to try instruction decoding on all data built into the executable. They cull obvious mistranslations. Yet they still have a 50x space expansion, someone mentioned. Most of those will be unreachable mistranslated code.
You can't look at a static executable which uses pointers to functions and say "that data cannot possibly be code", without constraining what those pointers point to. That involves predicting run-time behavior, which may not be possible.
Why doesn't it clean my garage also? I've got some leaves to rake as well.
> Can it handle self-modifying code
If it did, it wouldn't be "fully static" anymore. It's fundamentally contradictory.
The certification angle is the most interesting part to me. Regulated industries (aviation, medical devices) often can't use JIT for exactly this reason, the code that runs has to be the code that was certified. Static translation that produces a signable binary is a real unlock there, code bloat notwithstanding.
I wonder: how relevant is this portion of the software industry? Because I’m guessing there is also no way they can apply LLms at scale, which is never discussed in the larger AI at work narrative
I work in an industry that requires reproducible binaries from source, and cryptographic hashes filed with a regulator.
It's also not aviation or medical. So perhaps it's more common than you imagine.
I think my comment conveyed the wrong sentiment, my bad. I’m suggesting exactly this: there are extremely common cases in which deterministic software outcomes are needed/mandatory/regulated. Way more often than we think, often in boring and solved but critical environments. Yet the entire AI industry acts as if that is an afterthought or an unimportant edge case.
LLMs aren't relevant to aviation and medical devices
Exactly! And yet they’re touted as a catch all business case!!!
It is completely relevant, if you want reliable software that you use daily to continue running without a massive rewrite.
Before suggesting to use LLMs to completely rewrite this sort of software, there is a reason why compilers need to be certified to operate in safety critical environments. Not everything needs to use LLMs as the solution to a problem.
I would go as far to say that using an LLM in this context is the wrong solution and is irrelevant to critical systems. Maybe some here see everything as tokens and must solve everything in the form of using LLMs.
Rewriting a toy web app using LLMs from Javascript to Typescript is great, but isn't good for safety critical systems.
Safety critical software is mostly a compliance dance that incidentally produces artifacts with lower defect rates than usual. LLMs can help with safety critical code as long as a human signs their name that they are responsible for its behavior.
When I'm sitting in the plane that has CAS firmware, I'd like to think it wasn't written by an LLM and that my death in the case of a CAS failure isn't chalked up to "some engineer somewhere gets in trouble".
There probably already is generated code in there, only it was generated from UML. I don’t think that LLM generated code will be treated differently from the point of view of the relevant regulations.
I agree with you. The question is: how the hell is this never discussed when assessing the economic potential of AI-driven disruption. I ask because I have the impression that all the really relevant industries are resistent to the current narrative. That said we had Claud helping bomb a school full of kids, you would guess the military would know better but no :/
On par with QEMU, but still far behind Rosetta...
Isn't part of that due to Rosetta relying on Apple extensions to ARM to mimic x86-64 memory semantics?
The x86 memory model (TSO) is not Apple‘s invention, its a standard ARM extension.
The memory model by itself isn't, however Apple implemented it before Arm released an (incompatible) set of extensions that approach the problem at the instruction level instead of adding an Apple-style global TSO on/off switch in an IMPDEF register [0].
[0] https://lkml.org/lkml/2024/4/10/1531
I thought Apple Silicon also has some extra hardware support for handling x86 flags emulation for Rosetta. But perhaps I’m remembering that incorrectly.
And Box64, but I think the point is that this is closer to being guaranteed to work.
Does it mean I can finally run Slack on Asahi?
From the paper, Elevator currently supports only single-threaded binaries, does not support binaries using exception handling, has unsupported x64 extensions, and does not support self-modifying or JIT-compiled code. Slack is Electorn based, so t embeds Chromium and Node and depends on V8.
Maybe try an emulator? There's also this project I found: https://github.com/andirsun/Slacky
Just curious, is there anything the Electron wrapper provides over the web/PWA version, other than the drawing feature?
Cute, but Rice's theorem remains, and while they translated every byte as code, still no handling is possible for
static translation is only possible when you assume no adversarial code AND mostly assume compiler-produced binaries. hand-rolled asm gets hard, and adversarial code is provably unsolvable in all cases.still, pretty cool for cooperative binaries
I only read the abstract but I got the impression that their solution to this is they have both. They translate all the data as if it was code and if it gets called into they use the translation where if it gets read as memory they use the original.
Edit I found this in the paper
> Elevator sidesteps the code-versus-data determination altogether through an application of superset disassembly [6]: we simultaneously interpret every executable byte offset in the original binary as (i) data and (ii) the start of a potential instruction sequence beginning at that offset, and we build the superset control flow graph from every one of the resulting candidate decodes. Every potential target of indirect jumps, callbacks, or other runtime dispatch mechanisms that cannot be statically analyzed therefore has a corresponding landing point in the rewritten binary. These targets are resolved at runtime through a lookup table from original instruction addresses to translated code addresses that we embed in the final binary.
But in fact no modern processor/OS executes this either. Pages are marked as executable or not, and static data is loaded as non-executable pages.
that is why it was not "static const char buf[]" ;) it was not an accident
executable stacks are still common (incl on windows with some settings), and sometimes they are required (eg for gcc nested functions)
That won't be located on the stack either. The underlying buffer will be a TU local - ie static and not rx
Good grief, what a useless argument. Isn't it obvious that this could trivially be converted to a non-static array if that's really what was needed?
If you are going to be pedantic, at least be fully pedantic.
I think this is handled by Rosetta.
I read those bytes and immediately thought "mov eax, 42; ret".
It looks like their system would just generate return 42;
No based on the abstract it can handle that code. What it can't handle is runtime code generation.