Back in the 90s. I was part of a team working R&D project on flexible manufacturing. One of the central concepts was the use of buffers (also called decouplers) between manufacturing stations. These buffers were the space needed to place not finished products while they waited for the next station. Typically a conveyor belt. The main service is that both stations could run at slightly different rhythm, and they would not be causing problems on the other one. Either starving it or overwhelming it. Queues are pretty similar. You can have a consumer and a producer working and the queue in between prevents them from being blocked by each other. Thus I now see the main role of queues as decouplers.
Hum... The biggest hype on process engineering by the 00s was buffer size reduction. Because those buffers interfere with each other in chaotic ways, and they tend to turn "small problems that blow up soon, with small consequences" into "huge accumulated problem, that blows up hours after it appeared, with business-risking consequences".
Reducing buffer size puts back pressure on the whole system, which can be valuable to manage load (but often throttles faster stages and that throttling makes people uncomfortable). A meaningful metric is how much of the buffer is used at any given time and the throughout. If the buffer is backed up, that says there's a bottle neck on the consumption side of the buffer and more bandwidth is needed there. For whatever reason, adjusting buffer sizes is the more common action taken. A buffer provides throughput management but it also provides info/metrics about the operation of the system.
You can also observe this in games like Dyson Sphere Program, (which is all workers and queues and buffers) where adding a buffer storage section of a belt only hides the fact that you are under-producing one of the components required.
The buffer smooths out bursty flow but you don't want that in the middle of the pipeline, as it actually represents mid-pipeline inefficiency. You should actually be fixing the upstream or downstream problem.
[1] or other automation games like Factorio, Mindustry
I'll note that speedrunners absolutely buffer mid-pipeline in Factorio, and not just for hand-crafting purpouses. Sometimes you're waiting for R&D, sometimes you're just running half the machines for twice as long, giving you the same output while saving on build costs. The actual bottlenecks are constantly shifting. "I'm not speedrunning!" you might say, but every regular game could've started as a speedrun that could've gotten you to where you are faster.
Understanding the tendency of mid-pipeline buffers to hide problems is useful, but scorning them entirely is also suboptimal.
That's a very good analogy. Queues are not there to solve overload (and they never were), they are there as an *architecture tool* that allows decoupling and *can* (not always) ease the scaling of the queue process (workers).
I think the back-pressure should always be implemented from the very beginning, as it also helps with defining the requirements of what the service should be able to handle
You're essentially describing what a silicon engineer would call independent "clock domains" (the stations) and "clock-domain-crossing signals" (the workpieces.) And, indeed, you would also tend to handle clock-domain-crossing signals by sticking an async FIFO between the two clock domains.
Once you've read this, pick up Harchol–Balter's book Performance Modeling and Design of Computer Systems: Queueing Theory in Action. It's a really good introduction to the depth of this topic, and you'll come out with superpowers you didn't have before.
I don't think this is a good resource for an intro tbh. Unless you are interested in proofs and have some probability basics covered, it feels quite dense.
I liked Principles of Product Development Flow a lot more because it was easier to digest, although it's a different application of queuing theory.
That is also a good book containing a few practical applications of queueing theory, but it won't do anything to help you analyse your own systems on a more fundamental level.
I'm not sure how you came away with that impression. Three out of three reviewers say they overall enjoyed the book. The complaints fall mostly into four buckets:
- "I wish the book was simpler" (Jesse)
- "I wish the book was more advanced" (Murat)
- "I wish software engineering was more advanced" (Andrew)
- "I didn't understand the arguments the author made for why studying single-server exponential response time systems helps with drawing conclusions for time-sharing, heavy-tailed response time systems" (Jesse)
None of these paint the book in a bad colour, as far as I can tell. They say more about the reader's expectations than the book itself.
> you'll come out with superpowers you didn't have before.
with the impressions from the reviewers.
I don't think they got super powers from the book. In fact their outcomes mirrors my own outcomes when going deep into some math topics and then bringing them to work.
Author clearly has a wealth of real experience, but I have trouble reconciling some of it to the “real world.”
Supposing that you have “too many” messages in your queue, commanding your frontend client to retry its transaction that would’ve added one more, instead of accepting and enqueuing one additional job, doesn’t seem to me to change much. Instead of creating a mess for whoever is in charge of those servers, the mess is created directly in view of the end user, who sees whatever you show them when their transaction is being retried.
Their point about the bottleneck being the real problem that must be addressed if loads are going to be sustained at such a high level is indisputable, though.
I think I would define the necessary rule as: the queue’s maximum size just needs to be greater than the spikes you expect, but that’s of course no insight, just a definition.
I have found queues to be incredibly valuable at solving situations where load has occasional spikes, but urgency of the jobs being done is low. For instance, every time a user views a piece of content you want to make sure that you increment a counter of how many times the content has been viewed, and you also want to touch the timestamp of when that user last did a thing. If that happens even two hours late, it’s probably gonna be fine. The thing that the queue pattern excels at in the realm of Web applications, especially, is allowing you to have an HTTP GET which can be served entirely by a Web worker that is only allowed to talk to a read replica, which allows extensive horizontal scale. Analytics and other incidentals can be handled async in background jobs (and indeed, in emergencies, load-shedding those ancillary things has barely any impact).
I recognize that all of this probably sounds “obvious” - but I have seen enough codebases that do synchronous writes during GET transactions that I would stop short of calling this “common knowledge.”
> the queue’s maximum size just needs to be greater than the spikes you expect
There is one truth I have come to know, said by someone far wiser tha me: A queue is either empty or full. Which is to say a queue can either handle all the data coming in, or it can’t. When it can’t it will fill to capacity. This is a probabilistic thing, and you can only decide how many nines to plan for. And it’s worse than it looks at first, because queuing theory is very non intuitive with non linearities that make it very hard to reason about wothout having your nose rubbed in it.
So that means, that yes, you can keep doubling the size of your queue. And no, you can’t ever make it big enough to deal with a poisson distribution. And while you’re at it you will likely need to add workers. And you’re still back to capacity planning and deciding how much money to throw at the problem.
What you may be getting at, and what the article sort of failed at, is that queues are still super valuable for smoothing small spikes, or even large predictable ones. But a queue alone, without backpressure, or overflow will likely cause systems to fall over. Sometimes in ways that are hard to recover from, especially if you have some kind of microservices inspired architecture, where one thing going offline causes another queue elsewhere to fill. Or worse, bringing a failed service back online stresses another system causing it to fall offline. (not meant to be a dig on microservices by the way)
Similar things apply to buffered channels in Go: buffering frequently hides deadlocks, etc, but you don't observe them until the buffer is full. So buffers generally should be kept either as zero or very small to be able to catch synchronisation issues early
"People misuse queues all the time. The most egregious case being to fix issues with slow apps, and consequently, with overload. But to say why, I'll need to take bits of talks and texts I have around the place, and content that I have written in more details about in Erlang in Anger."
This feels like an unfinished gripe—summarize the key point now rather than promising a future deep dive. Backing claims with a concise example would make the argument useful instead of vague.
Back in the 90s. I was part of a team working R&D project on flexible manufacturing. One of the central concepts was the use of buffers (also called decouplers) between manufacturing stations. These buffers were the space needed to place not finished products while they waited for the next station. Typically a conveyor belt. The main service is that both stations could run at slightly different rhythm, and they would not be causing problems on the other one. Either starving it or overwhelming it. Queues are pretty similar. You can have a consumer and a producer working and the queue in between prevents them from being blocked by each other. Thus I now see the main role of queues as decouplers.
Hum... The biggest hype on process engineering by the 00s was buffer size reduction. Because those buffers interfere with each other in chaotic ways, and they tend to turn "small problems that blow up soon, with small consequences" into "huge accumulated problem, that blows up hours after it appeared, with business-risking consequences".
Queues are pretty similar.
Reducing buffer size puts back pressure on the whole system, which can be valuable to manage load (but often throttles faster stages and that throttling makes people uncomfortable). A meaningful metric is how much of the buffer is used at any given time and the throughout. If the buffer is backed up, that says there's a bottle neck on the consumption side of the buffer and more bandwidth is needed there. For whatever reason, adjusting buffer sizes is the more common action taken. A buffer provides throughput management but it also provides info/metrics about the operation of the system.
You can also observe this in games like Dyson Sphere Program, (which is all workers and queues and buffers) where adding a buffer storage section of a belt only hides the fact that you are under-producing one of the components required.
The buffer smooths out bursty flow but you don't want that in the middle of the pipeline, as it actually represents mid-pipeline inefficiency. You should actually be fixing the upstream or downstream problem.
[1] or other automation games like Factorio, Mindustry
I'll note that speedrunners absolutely buffer mid-pipeline in Factorio, and not just for hand-crafting purpouses. Sometimes you're waiting for R&D, sometimes you're just running half the machines for twice as long, giving you the same output while saving on build costs. The actual bottlenecks are constantly shifting. "I'm not speedrunning!" you might say, but every regular game could've started as a speedrun that could've gotten you to where you are faster.
Understanding the tendency of mid-pipeline buffers to hide problems is useful, but scorning them entirely is also suboptimal.
That's a very good analogy. Queues are not there to solve overload (and they never were), they are there as an *architecture tool* that allows decoupling and *can* (not always) ease the scaling of the queue process (workers).
I think the back-pressure should always be implemented from the very beginning, as it also helps with defining the requirements of what the service should be able to handle
You're essentially describing what a silicon engineer would call independent "clock domains" (the stations) and "clock-domain-crossing signals" (the workpieces.) And, indeed, you would also tend to handle clock-domain-crossing signals by sticking an async FIFO between the two clock domains.
Once you've read this, pick up Harchol–Balter's book Performance Modeling and Design of Computer Systems: Queueing Theory in Action. It's a really good introduction to the depth of this topic, and you'll come out with superpowers you didn't have before.
I don't think this is a good resource for an intro tbh. Unless you are interested in proofs and have some probability basics covered, it feels quite dense.
I liked Principles of Product Development Flow a lot more because it was easier to digest, although it's a different application of queuing theory.
That is also a good book containing a few practical applications of queueing theory, but it won't do anything to help you analyse your own systems on a more fundamental level.
This review is not so nice: https://emptysqua.re/blog/review-queue-theory-book/
I'm not sure how you came away with that impression. Three out of three reviewers say they overall enjoyed the book. The complaints fall mostly into four buckets:
- "I wish the book was simpler" (Jesse)
- "I wish the book was more advanced" (Murat)
- "I wish software engineering was more advanced" (Andrew)
- "I didn't understand the arguments the author made for why studying single-server exponential response time systems helps with drawing conclusions for time-sharing, heavy-tailed response time systems" (Jesse)
None of these paint the book in a bad colour, as far as I can tell. They say more about the reader's expectations than the book itself.
Sure. But I'm trying to connect what you said:
> you'll come out with superpowers you didn't have before.
with the impressions from the reviewers.
I don't think they got super powers from the book. In fact their outcomes mirrors my own outcomes when going deep into some math topics and then bringing them to work.
Even if you just read the first few chapters of this you will not come out unchanged.
Author clearly has a wealth of real experience, but I have trouble reconciling some of it to the “real world.”
Supposing that you have “too many” messages in your queue, commanding your frontend client to retry its transaction that would’ve added one more, instead of accepting and enqueuing one additional job, doesn’t seem to me to change much. Instead of creating a mess for whoever is in charge of those servers, the mess is created directly in view of the end user, who sees whatever you show them when their transaction is being retried.
Their point about the bottleneck being the real problem that must be addressed if loads are going to be sustained at such a high level is indisputable, though.
I think I would define the necessary rule as: the queue’s maximum size just needs to be greater than the spikes you expect, but that’s of course no insight, just a definition.
I have found queues to be incredibly valuable at solving situations where load has occasional spikes, but urgency of the jobs being done is low. For instance, every time a user views a piece of content you want to make sure that you increment a counter of how many times the content has been viewed, and you also want to touch the timestamp of when that user last did a thing. If that happens even two hours late, it’s probably gonna be fine. The thing that the queue pattern excels at in the realm of Web applications, especially, is allowing you to have an HTTP GET which can be served entirely by a Web worker that is only allowed to talk to a read replica, which allows extensive horizontal scale. Analytics and other incidentals can be handled async in background jobs (and indeed, in emergencies, load-shedding those ancillary things has barely any impact).
I recognize that all of this probably sounds “obvious” - but I have seen enough codebases that do synchronous writes during GET transactions that I would stop short of calling this “common knowledge.”
> the queue’s maximum size just needs to be greater than the spikes you expect
There is one truth I have come to know, said by someone far wiser tha me: A queue is either empty or full. Which is to say a queue can either handle all the data coming in, or it can’t. When it can’t it will fill to capacity. This is a probabilistic thing, and you can only decide how many nines to plan for. And it’s worse than it looks at first, because queuing theory is very non intuitive with non linearities that make it very hard to reason about wothout having your nose rubbed in it.
So that means, that yes, you can keep doubling the size of your queue. And no, you can’t ever make it big enough to deal with a poisson distribution. And while you’re at it you will likely need to add workers. And you’re still back to capacity planning and deciding how much money to throw at the problem.
What you may be getting at, and what the article sort of failed at, is that queues are still super valuable for smoothing small spikes, or even large predictable ones. But a queue alone, without backpressure, or overflow will likely cause systems to fall over. Sometimes in ways that are hard to recover from, especially if you have some kind of microservices inspired architecture, where one thing going offline causes another queue elsewhere to fill. Or worse, bringing a failed service back online stresses another system causing it to fall offline. (not meant to be a dig on microservices by the way)
I agree with this - queues may not be the end all solution but it is a valuable tool in our kit.
And in the right situations, it can be enough.
Similar things apply to buffered channels in Go: buffering frequently hides deadlocks, etc, but you don't observe them until the buffer is full. So buffers generally should be kept either as zero or very small to be able to catch synchronisation issues early
Two past submissions with notable discussions:
https://news.ycombinator.com/item?id=39041477 - 18 Jan 2024, 153 comments
https://news.ycombinator.com/item?id=8632043 - 19 Nov 2014, 60 comments
Or you could just play Factorio.
Reminds me of this other queuing theory blogpost classic https://medium.com/swlh/fifo-considered-harmful-793b76f98374
TLDR LIFO (stack, not queue) is often a better choice for many workloads, despite violating our sense of fairness.
Huh. That's so obvious but I never would have thought of it.
"People misuse queues all the time. The most egregious case being to fix issues with slow apps, and consequently, with overload. But to say why, I'll need to take bits of talks and texts I have around the place, and content that I have written in more details about in Erlang in Anger."
This feels like an unfinished gripe—summarize the key point now rather than promising a future deep dive. Backing claims with a concise example would make the argument useful instead of vague.