I just had Kimi K2.7-code rebase my Fil-C OpenSSH patch from 3.3.1 to 3.5.7 with quite bare bones instructions and it seems to have worked.
177KB patch, so it's not a small change. The patch did not apply cleanly initially; the agent had to do nontrivial work.
I just showed it the patch against 3.3.1, what command to use to build, and the path to 3.5.7 along with a link to the documentation of the change (https://fil-c.org/constant_time_crypto).
Note, I use my own coding agent (T800, which isn't public, and was previously well tested and tuned for K2.5).
I think this cost me between $5 and $10 in API usage.
Reading their modified license terms, it cracks me up, because they've basically remade the MIT to be the MIT + the one clause that the BSD used to have, which didn't care about MAU or revenue, if you used it in a product, they asked you to 'advertise' them basically. Honestly, its a reasonable request.
In fairness, Composer 2 performed differently on evals than Kimi's own coding models, claimed to be better than Claude Opus 4.6: https://x.com/fynnso/status/2034706304875602030 / https://archive.vn/bVtik. And, per Lee Robinson (Cursor employee), it is very likely Cursor builds its own foundational model for Composer 3.
Kimi works great in their CLI, but their CLI has a number of workarounds for quirks of their models, including detecting when the model gets into a loop, and reverting to a checkpoint but letting the model compose a "message" to its past self (search their CLI for "BackToTheFuture"...) It doesn't work so well in a harness that doesn't take those quirks into account.
Shaming others when all AI is trained off scraped content and code huh? Many of those sources either breaking ToS or being illegal, such as Anna’s Archive. Bold move. And Chinese models in particular have been accused of distilling off American models.
To be clear, the “advertising” clause just requires you to disclose that you use the thing somewhere in the product, such as credits in an “About” section.
Personally, when I use open code or routers, I feel that beyond a certain level, the models don't make a huge difference to me. Except for expensive and mediocre models like Gemini. In that sense, Chinese models are pretty good. I usually write code in function or method units and then design and assemble them together.
GPT series models are more thorough and better, but I'm not sure if the difference is enormous. It seems to depend on the workflow, but in my opinion, if you are thorough enough, I wonder if there really is a big difference
I've kind of given up on the routers for "free" inference, as you would expect, they tend to give you sub-par thinking because they are obviously trying to conserve as much inference as possible.
I've had some success turning my macbook M1 pro into a heating pad with Qwen 3.6 35B A3B MTP. Trying to use Gemini models "locally" resulted in a similar "short shrift" of effort resulting in mistakes and lots of turns. The reports of Fable being relentlessly "proactive" shows you can go the other direction as well, if you have strong enough branding and effective invoicing.
Tangent: did the MTP help you at all? I’ve tested that model back to back on my M1 Max MBP and the MTP version was actually marginally worse. I wonder if I didn’t use the right settings, although I tried several based on the obvious sources.
The difference in outcome isn't that big but yes, you need to be more rigorous. For instance I've found that the Kimi K2.5 and K2.6 models will comment out failing tests rather than fix a problem they just caused (mistaking them for "pre-existing failures"), so you need to specifically make commented-out tests break the build. I've not personally had that problem with any of the Anthropic or OpenAI models.
I wonder why it's the natural tendency of models to BS or do stuff like this when they don't have the correct answer - it's clear that they can program refusal into them, but for some reason, refusal has to be injected after the fact, and models can't really arrive at the conclusion that they can't answer properly.
I really hope we stop using the term "Chinese models". It has this air of Negative connotation. It's the equivalent of calling cars Japanese, which people used to do but now is almost entirely meaningless. You just call them Toyota, Honda, Lexus etc.
I don't know, I tried using one of the Chinese models and it was VERY quick to scan my entire home dir, so maybe your threat surface is a little different than mine
They return instructions for you to do something, and you or a script you permit chooses to execute what the model tells you and return the result to the model.
For me, it has a positive connotation! In my experience, Chinese Model means cheaper, but still quite effective model you can use for millions of tokens without burning your entire wallet in seconds. That's why I get more excited over a Chinese model release over American models.
I don't think "Chinese" is pejorative in this context any more than "American" is. They are one of the two ecosystems. What's wrong with saying "Japanese cars" today?
Only that it’s a fairly meaningless grouping. When japan first entered the car market in north america there might have been some commonality, but now what characteristics do they share that some american cars don’t have? They’re not even imported a lot of the time.
Given that, it does start to feel tinged with racism if someone insists on grouping things together that don’t really belong together.
As for Chinese LLMs, the term doesn’t “feel” pejorative to me - but i also don’t see a totally clear set of attributes they share. Not all are open-weight. Some are small and can be run on consumer hardware, some are huge. They even have a variety of answers to what happened june 3rd 1989
Sadly there is a pejorative context. The constant us, the free world vs China, the evil Soviets rhetoric from every major news establishment and executive creates that negative view
On the other hand the Trump administration has successfully managed to make Chinese seem better than American, so there might not be that much of a pejorative context any more..
For those that don't like calling them CCP models, may I remind you, the CCP won't let Chinese AI researchers out of the country any more without securing approval first[1].
I tend to agree with the comment in my reply thread about whether we really need to add biased modifiers to the essence of a good product. I think every national system in this world is flawed. And in this context, 'China or Chinese' is often used in a negative sense, like 'Made in China'. But KIMI is a good model, and I think the comment that pointed this out to me correctly identified my unconscious bias.
And even if the Chinese Communist Party provided funding, the result is still transparently released. So even if it is some kind of propaganda, I don't see what the problem is.
Is the monopolistic greed of American companies 'good', and China's greed 'bad'? I do have that question.
The question is not whether it is a good model, it is whether the model can be trusted to not act intentionally maliciously against certain topics or certain users.
We live in a time of a great geopolitical rivalry and high tensions with an emergent technology with tons of national security implications. To pretend otherwise is silly, and to fail to ask the question, dangerous.
Doesn't matter, because they're open-weight, so I can just download them to my PC and... hey, look, now they're owned by me! Unlike the "good" Western counterparts which are all fully proprietary. (Except Mistral, but they're nowhere near SOTA.)
Ah yes, those pesky Chinese backdoors that no single instance was ever found, even though Chinese open-weight model are a thing for many years now. Many people burn through millions of tokens on these models every day - surely someone would have triggered one of those backdoors, right?
Or that pesky CCP censorship and propaganda baked into the model, which any random guy can remove from whichever model they want as a single weekend side project with an off-the-shelf tool[1]. (Try it. It's fun. I've done it myself.)
I agree it is an empirical question. I do not know if that research has been done in the open sphere. But please, do not pretend that there isn't a real geopolitical rivalry going on that makes such questions a legitimate, non-fruity concern.
Sure, but the difference is that one side (Anthropic, OpenAI, Google and co.) hoards everything, keeping it proprietary behind API paywalls and constantly spewing AI doomer rhetoric while limiting what you can do "for your own safety" (especially Anthropic; Dario has been consistently doing this since GPT-2 days, every time claiming that things are "too dangerous" for the common folk to handle). While the other side (big, bad China) releases all SOTA open-weight models with which you can do whatever you want with, along with a ton of open research.
So yes, there is geopolitical rivalry, but one side is deliberately antagonistic (not releasing anything in the open, putting arbitrary restrictions, spewing toxic rhetoric, applying sanctions, etc.) while the other side is letting everyone (including their rivals) to use what they've produced with little-no-to restrictions.
I'm under no illusion that if the situation was reversed China would most likely do the same, but as things stand you can probably guess which side I'm rooting for here (at least until the roles reverse).
Yes, each are following their own business strategy, frontier labs have no incentives for releasing open weights, while second and third-tier labs, it is one of their few plays to gain market/mind share. But business is only part of it, as national security is another. It may be that the CCP has been relatively hands off exactly because of my concern, judging that market share and reputation is more important (for now).
Assuming you are just naive like so many others about China...
China is a communist country with elements of capitalistic markets baked in. But the capitalistic elements are mostly a facade. Underneath, the state retains full ownership and control of all business. The CCP runs all aspects of the government (including the courts/judges), and is the single entity that decides what directions the country (and it's businesses) will move in.
The CCP, who defacto owns everything and has ultimate final say on everything, has one leader that has the ultimate final say on _everything_, Xi Jinping.
So while the waters of CCP models feel warm and free, understand it's not organically like that.
> China is a communist country with elements of capitalistic markets baked in.
While I get the point you're making (it should be pretty obvious to anyone who's held a newspaper), I think it's important regardless to point out that Chinese companies AFAIK aren't worker-owned or -controlled, so you can't exactly call it communism, either. And they obviously do not have a "free market capitalism", as you just discussed.
It's simply a highly authoritarian state then, I guess?
The companies are all worker owned, because the state exists for the people, and the state owns everything. At least on paper that's how it is sold. After all it is the Peoples Republic of China.
I mean, if that's the bar then the state owns everything in America as well. After all, you don't really own your land if the state can regulate what you do on it, what it can be used for, what you can build on it, and can take it away if they really need it. The state owns the land, the money supply, and regularly restricts and instructs businesses to take or desist from actions.
As such, the state owns everything in both countries, the only differences are to what extent they control things.
I wouldn't even call the USA a capitalist system anymore, the economy is so heavily regulated and interfered with. It's a "managed economy", like pretty much every other nation's economy in the present day.
Crazy mental gymnastics if you think the American oligarchs don’t have the final say on everything in America. They’re just smart enough to do it behind the scenes, well they used to be. They barely bother anymore.
Google and Tesla making products to sell to the government is different than the government funding the government to make products for the government.
In China it's all one entity with these mock facades of privatization. Trump cannot instruct Google to put picture of dogs on their homepage. If Xi wakes up and wants dogs on Alibaba's homepage, give it 30 minutes.
It's wholly ignorant or dishonest to make the comparison.
Tim Apple and the other tech CEO constantly groveling at Trump’s feet indicates that he might be able to do that.
Just like threatening TV networks about having their licenses revoked of blocking mergers unless they fire the people making fun of him on TV (of course with slightly mixed success)
> Trump cannot instruct Google to put picture of dogs on their homepage.
Sundar Pichai would personally be barking on a livestream on the homepage.
Trump is quite literally the one president showing that the US has zero rules or anything to hold power back from the white house, really not the example you want.
Courts and legal obligations are to a certain extent irrelevant at this point. There are plenty of illegal ways that Trump can fuck over Google and face no consequences.
e.g. he had Colbert fired (and who knows what else) by threatening to block the Paramount/Skydance merger
I would really love to know if anyone has any experience with something like opencode + Kimi K2.6/2.7 now compared to Claude Code. What is better, what is worse, what is the cost comparison. I am currently paying $100 for the 5x Max plan, but Fable is running through the usage limits quite drastically and I cannot really say it's night and day compared to Opus. Also, I use this mostly for my side projects, so the $100 bill is quite noticeable. I definitely don't want to pay more.
I do have this experience. I've used Claude Code (with Opus mostly), and then switched to opencode (mostly with Kimi 2.6) for my personal projects; it's based on a couple months of use.
Claude Code is better. But Opencode + kimi 2.6 is workable, which is big. For bare code writing, if you know what exactly you want, most popular models are fine (deepseek, kimi, etc), it feels more or less the same as anthropic models.
At the same time, Opus seems to understand my intent way better than e.g. deepseek. I need to be much more precise with my prompts when using deepseek - it often goes in a wrong direction if I'm lazy. This results in a workflow which feels quite a lot different from Claude Code.
Kimi is in between - for me it brings back "lazy prompting" workflow, and I can trust its plans more than deepseek. It enables a workflow similar to Claude Code, it's workable, but it is a bit worse everywhere. Smaller context, a bit more errors, decisions are a bit worse, recommendations are a bit worse, debugging capabilities are a bit worse, etc.
On the usage side, $100 Claude plan is a great value actually. On paper, per-token kimi is way cheaper, but Claude subscriptions are heavily subsidized - you get much more tokens than $100 can buy you. So, in the end, opencode + kimi vs claude code could be of a similar cost, for similar usage patterns. Deepseek can be cheaper, and it has insanely cheap cached tokens, but experience may vary - depending on your habits, you may need to adjust how you work, coming from claude code.
I'd say for side projects something like $10 Opencode Go plan + $10 of extra DeepSeek v4 credits (e.g. on OpenRouter) can be very workable.
>At the same time, Opus seems to understand my intent way better than e.g. deepseek. I need to be much more precise with my prompts when using deepseek - it often goes in a wrong direction if I'm lazy. This results in a workflow which feels quite a lot different from Claude Code.
how much of that is Opus injecting prior conversations from memory?
Almost none of it, if you're using Claude Code. Until recently Claude only had the option of retaining memory across conversations for the desktop app.
I almost never use the desktop app, I have maybe 2-3 conversations over the last year that have nothing to do with my job. Opus (and now Fable) genuinely do seem to "understand" what you intend based off what you're explaining a lot better than other models I've tried.
Gemini gets close in some cases, but it falls over in the actual implementation sometimes. I haven't tried Kimi yet but MiMo isn't too shabby either.
This is generally been my experience as well, but i think the main reason for claude code being better at understanding intent is their massive system prompt.
I use Claude at work and Kimi for side projects. My org has LiteLLM and Kimi 2.5 enabled but it rarely works, so Claude and GPT are my main tools. I actually enjoy Kimi more as it feels like a dev in a job interview. Watching it reason through problems is a lot like I tend to explain things during whiteboarding sessions. The number of times it says, "wait", is just funny. Claude on the other hand is much more like an employee (or team of employees) that already know they have the job. It doesn't do a ton of explanation up front. (you can dig into processes if you want). It just goes along, asking questions only when it needs... and then delivers a comprehensive report or plan. OpenCode is a better harness. I don't have a direct comparison on costs, as I haven't tried to do the exact same prompt on both models. I can say that I recently had Kimi generate a wrapper around libpq for the ZenC programming language: https://github.com/nobleach/zenc-postgres and it took about an hour or so and cost around 4 dollars.
I am extremely happy with ohmypi, but you could use OpenCode or just keep using Claude Code!
DeepSeek-V4-Pro is adequate plus use DS4-Flash for tasks or other small activity you’d use Haiku or Sonnet for. Go sign up with $10 prepaid.
OpenCode Go - go sign up with $5 for a month and use Qwen-3.7-Max for design/plan/architecture or difficult troubleshooting. Feels closer to Opus 3.6 or 3.7 than DeepSeek, closest I’ve found.
OpenAI Codex, $20 a month plan, use GPT-5.5 via API for the same design/plan/architecture/troubleshooting/author commits. (You can also pay $100 and cut and paste really difficult problems into chat with the GPT-5.5-Pro model.)
Xiaomi MiMo-2.5-Pro, find a friend to give you a $2 referral code, you get 72 cents free. Same pricing as DeepSeek. Somewhere between Sonnet and Opus, quite capable. Apply for the UltraSpeed beta too.
You can switch in and out from these models on the fly in OpenCode or ohmypi and simply find the one that feels best to you. I use CodexBar to watch consumption in near real time.
For a casual user or someone new to programming, Cursor’s $20 plan is an excellent start with Composer-2.5 and Composer-2.5-Fast. You get an API allowance too you can use to access Opus-4.x or GPT-5.5-Pro from OpenCode or ohmypi in addition to Cursor itself.
Finally, if you use Grok or Twitter, SuperGrok at $30 a month has a good vision model, which I used for automated testing of front ends. I’m migrating to locally-run Qwen-3-VL on a commodity Mac, though. If you’re less technical unreach makes hosting local models on a Mac easy.
If you have a powerful GPU like an RTX 5090, try Qwen-3.6 locally on that too. Use ollama or llama-swap which is fairly easy to use.
I have not tried new Kimi yet but we have been able to keep our costs at or below $200 a month per employee with a team of 3 professional developers, 1 graphic designer who uses a lot of Midjourney and Grok Imagine now driven from workflows she made herself in ohmypi, and 1 nontechnical user (account manager / project manager) who uses ohmypi to help her gather requirements and track implementation of them. With a tiny bit of effort we could get that number closer to $75 per employee per month.
Deepseek-V4-Flash-Free on Opencode is what I use most of the time, for simple tasks. Such a good model to give for free (assuming you're okay with harvesting your data)
This was my experience using GLM 5.1 in Claude Code but it works far better in OpenCode, I’d really like to understand why. I think it’s a bit stronger than Sonnet 4.6.
I use the oh-my-openagent planning system and haven’t used vanilla OpenCode enough to know how much that is contributing.
The answer is easy, CC is bug for bug optimized for Anthropic models. They don't even test it with other models, let alone provide support for all small compatibility quirks of different provider implementations.
On the other hand, Opencode, Pi agent and other open source tool offer much better support for all models, including open source.
For some reason I never had a good experience with Kimi (via OpenRouter) in OpenCode. It would only take a few turns for it to run off and mess something up. Terrible instruction following I’d say.
I use DeepSeek V4 Pro now, which works pretty well.
> If you ask Claude in Chinese to introduce itself, it will claim it's Kimi :)
That's a funny anecdote, buut I'm not able to reproduce. Where/how/when did you get this, or hear about it?
It might've been patched by now, at least that's the feel I get from my limited testing.
Using bare aichat [1] with no system prompt and no temperature nor top_p (and I'm truncating the response after the first line that contains the name the model gave, because the point has been made clear by then), and with the same prompt (approx. "Introduce yourself!") every time:
I think there is some threshold after which "best" model doesn't matter, we are not that far from it. Fable now is really good, in a year or so, if Kimi catches up, even if Fable6 is much better, I think I will use kimi at 1/10th of the price.
I said that about opus 4.5 at the time, thinking "this is so good, in 6-12 months the Chinese models will be as good and cheap, I will use them", but I was wrong.. I pay premium for opus4.7/8 and Fable.
But at some point, it will just do the thing you want it to do, and then the race to the bottom will start.
Now that Chinese companies have access to some very good Fable tokens, I hope it speeds up the race.
yes, that is my point, but at some point, better is unmeasurable, and both the better and the not-as-good produce similar result, and then you pick the one with 1/10th of the price
I was wondering how does Anthropic and likes keep competitive when Opus is ($5 / $25) 5x times more expensive compared to Kimi K2.6 ($0.7 / $3.4) or other Chinese models, while being only marginally better.
My theory is that US enterprise just can't send data to Chinese and that's understandable, but is that "the moat"?
The moat right now is model performance and what that means for how many tokens and additional time you spend.
I say this as a relatively frequent user of Kimi models and generally a big fan. But on not-yet-gamed benchmarks like DeepSWE, Kimi K2.6 is beaten soundly by Claude Sonnet 4.6 ($3 / $15) and even slightly by GPT 5.4 Mini ($0.75 / $4.50).
There's no question Kimi models are very good for a lot of code tasks. They're the best quality open weight model. But to get similar overall outcomes as on Sonnet/Opus, on average you'll spend many more tokens and will have to do more managing of the model. You shouldn't look at price per token, you should look at how much you pay for the entire process.
I'm more interested in how much effort I have to put in, at least while I'm paying in the range of current subscriptions (so ~€100-€200 a month or so). If the prices go up much more than that I'll have to switch to caring more about token efficiency. But at current pricing the bottleneck is my attention, not model efficiency. As such, even a small improvement in model quality - and hence, a decrease in how much attention I have to spend on it - makes a big difference.
I personally dont put any weight to DeepSWE. Other than 5.5 being directionally the best model, it gets the others pretty wrong in my experience. FrontierCode from cognition looks interesting
Any benchmark is iffy and has weird results, but this is the best we got at the moment. Most people working with Opus and Kimi would likely tell you they're much further apart than the numbers that were quoted for Kimi K2.6, and DeepSWE seems to capture that gap better.
One major thing DeepSWE has going for it is that all other benchmarks (including those quoted by MoonshotAI on this page) don't: the other benchmarks that are completely gamed. The benchmark answers are public and part of each model's training data. This benchmark may still be iffy, but at least it's not gamed.
American labs also use gamed and cherry-picked benchmarks extensively. Anthropic used them in their Fable announcement and avoided DeepSWE because it doesn't beat GPT-5.5 in that one. Google's numbers for Gemini 3.5 Flash recently did not at all line up with people's subjective experience using these models, and this also happened with Gemini 3.1 Pro before it.
Everybody has incentives to manipulate benchmark results to show their models in the best light.
API token price is one thing, but subscriptions on Claude are a good value. Weirdly everyone says that Claude subscriptions are subsidized because of the API price, even though (1) no one actually knows Claude's cost of inference, and (2) Chinese providers are also able to provide cheap inference, so why do they think Claude can't?
I also wonder if Enterprises have deals for other API pricing that is not posted publicly, so all we see is a high API sticker price.
I think the perception is that it is not 'only marginally better'; whether or not you specifically agree that perceived quality gap lets them differentiate on price.
I'd further say that there are probably enough rational actors running evals out there that the marginally better is not pure vibes for the cases where people are spending lots of money, but I only have direct line of sight to some of those eval suites. Maybe everyone is irrational and anthropic is exploiting that!
I think most people who've tried them both would tell you Anthropic's models are more than marginally better than Kimi. Kimi and the other open source models may score well on SWE-bench or whatever but the gap is noticeable IMHO once you actually try to use them.
It depends on what your task is and how precise your prompts are. Planning with fable or 4.8 and laying out the plan in step by step process and coding with mimo v2.5 pro or dsv4pro or qwen 3.7 max and doing a final review with 5.5 has worked really well for me for infra stuff.
I reckon right now the Enterprise concern is more FOMO around the AI wave and how to retrain or replace up to hundreds of thousands of employees. I don't think cost is the main concern right now.
But if AI doesn't lead quickly to vast large scale replacement of workers as promised, I could definitely see the C-suits and their gaggle of consultants starting to ask questions about token pricing.
I want Opus to be only marginally better, but I do mostly research engineering and its ability to not fuck up my projects is absent. Every time my credits lapse I let kimi and composer2.5 have some play and it’s basically just an excuse for me to keep playing computer because when the oai/ant credits refresh I always need to spend hours recovering from the other models either misconceptions or boneheaded eng practices. Even when I only let it touch my web games…
I think none of them having a defacto and high quality English focused cli is a big part of it. None of the Chinese models I've tried have worked well in opensource cli's. Granted, I've only tried a few, but still...
I tested it properly and it seems rather decent improvement atleast it does use less tokens for the same task which is good enough a reason for me to use it over k2.6 if I need an open model
I think any new model not demonstrably maybe 20-30% over Deepseek v4 capabilities priced over the price per token of Deepseek is almost automatically deprecated as low use model (maybe for Planning).
These things enormously benefit from economies of scale. I am fairly certain their margins might be low but they don't actually sell API at loss, however that doesn't mean your cost footprint would be anywhere as low.
I wish they wouldn't call these "open source" models. The output weights are open but that's more analogous to a binary. The source would be the training data and techniques that went into producing the binary/weights.
"Open weights" is also a term in wide use and accurately tells us what we're getting.
In OpenRouter, there is an "int4" tag for Moonshot provider of Kimi K2. 7 Code. Isn't that too low, particularly coming from the very developer of the model? Os that a mistake? How is it in their direct API offer?
The model is natively quantized (i.e. it was trained that way in the first place, so this is not a post-training quantization which degrades performance).
Not every weight is quantized. For example, those weights which don't take much space or are highly important are left in higher precision. State-of-art quantization of weights is never done uniformly (i.e. to all weights and in the same way).
I am still very new to the open-weight/source models. If anyone is using them full-time, I’d really love to hear about the setup and how they perform, as I am considering moving my org off Anthropic products.
For personal stuff I use forgecode with openrouter. Firstly, forgecode is a much better harness than Cloude code (IMHO).
Anyway, regarding the models, my experience is that there is not much difference in terms of quality, but the cost difference is insane. At least for how I use agents. Yesterday's example is the following: I am developing a small DSL for search across complex technical documents. I wanted to add a small operator to it and thought that to give fable a spin. It burned through 13 USD and while it delivered the solution it wasn't objectively better than what Deepseek v4 did for 1.7 dollars (same exact task because I was curious).
For full disclosure, I ask agents for piecemeal stuff. Like in the DSL case, I designed the operators and then asked agents to implement them one by one. Probably if I asked to design the whole thing starting from these complex documents Fable would shine, but every time I try to give agents broader scope tasks they burn through millions of tokens, generate questionable code, which I have to spend time familiarize myself with.
It is very basic and I. No DSL expert, but my idea was to build a graph from those complex documents (maintenance manuals for HVDC equipment)that to decide what tools can be used for a given part on a given equipment in a given situation. If there is a path from A to Z it means you can use that tool given the circumstances. Basically the DSL is about pruning the graph as you specify things. I could have very well done without, but it is a fun project to try out rust, so I said, why not :)
These models have open weights, but at the moment most flagship models are practically accessible only through third-party model providers. The main exception is models in the ~30B parameter range, which can still be run on consumer-grade GPUs. That said, even consumer GPUs have become increasingly expensive and difficult to justify in recent years.
you can see that I attribute the models used. What I found was 4.7 was not very good at `go` code which was why you started to see `Gemini 3 Flash` in the attributions.
4.7 is what Cerebras provide and for me, speed in iterations is a lot more important. Having played around with MiMo v2.5.0-Pro, I am 100% sure it could have done what Gemini 3 Flash did.
There were a few points where I was stuck and needed Sonnet to explain things to me, but I think the dirty secret that Anthropic and OpenAI won't tell you is, if you know how to code, the models are honestly good enough.
Based on my experience with MiMo and what others are saying about GLM 5.1, we are now in a hardware race. The Chinese Models are 100% drop in replacement for Claude if you know how to program but want to AI to help amplify what you know. What I will consider now is what provider can provide the fastest inference.
MiMo-v2.5.0-Pro-Ultraspeed is really good at generating good results quickly and burning your money as fast.
I have been using deepseek v4 flash as my main model for everything ever since dwarf star came out. I run it on my M4 Max MacBook Pro with 128gb of memory. I run it usually as a server and connect to it over tailscale with my coding machine and use the Pi coding agent. It’s a big leap over using the Qwen models though it doesn’t have vision - so I still will run those when I use vision. GLM 4.7 flash was my previous go to for coding but I’ve completely switched to deepseek for all non-vision things.
I keep trying to switch to the Chinese models, but I keep finding myself asking Claude to fix their outputs. (Both functionality and style.) So I always end up switching back.[0]
I also keep trying GPT, which is quite solid. Very fast, great at debugging. But its code is often overly clever and hurts my brain.
(Maybe fixable with prompting. I tried and it helped the Chinese ones a bit. Just tell them do be elegant, like in the old image AI days "+good -bad"!)
For now I do still need my human brain to actually be able to make sense of the stuff, and Claude is the only one that consistently meets that requirement.
But I am hoping that one of these days, one of the Chinese labs figures out the special sauce :)
--
[0] (For smallish edits, though, I am having a great time with DeepSeek Flash. Practically unlimited AI on tap! How cool is that.)
I use glm5.1 plus pi with a few customized skills and am very happy with it. I hadn’t touched my Claude 5x plan for a couple of weeks but opened it back up in Claude code when fable was released and did a few tasks and still was happy to return to glm/pi.
Output tokens are almost 5x more expensive than mimov2.5 pro/dsv4pro. I’m curious to see if Kimik2.7 is that much better. Feels like kimi are positioning themselves as the premium open source models
I find that I don't use a ton of output tokens. I'm usually around 95% cached input, 4% input, and 1% output.
For me, the big thing with MiMo-V2.5-Pro and DeepSeek V4-Pro is that cached inputs are practically free. Kimi K2.7 Code is 53x more expensive for cached inputs which is 95% of my costs.
If I use 95M cached input tokens, 4M input tokens, and 1M output tokens, that'd be: $18 for cached input on Kimi K2.7 Code vs $0.34 with MiMo/DS; $3.80 for inputs on Kimi vs $1.74 with MiMo/DS; and $4 for output on Kimi vs $0.87 with MiMo/DS.
Of all the places where I'm accumulating costs by using Kimi, it's the cached inputs. The real savings with MiMo/DS's price cut is the cached inputs.
Has anyone taken these open weight models from China and stripped the CCP out of them? I do not mean that snarkily, I mean review them thoroughly using techniques for weight introspection (concept activations) in response to things that one might expect would trigger deceptive/malicious behavior if the CCP had actually tried to implant context-specific behaviors (e.g. the accusation of generating vulnerable code if being used in American government applications, which I don't know if it was ever proven).
Just in case there are those who'd reflexively down vote this post, I'd just like to say that in a time of great national geopolitical rivalries, this kind of question is not unreasonable one to ask. Indeed, its applicable question whichever nation you live in.
> Has anyone taken these open weight models from China and stripped the CCP out of them?
The CCP is not influencing my Rust code quality that much. Though I did notice all my lifetimes are now 'static because nothing is ever allowed to leave the party's ownership, unsafe blocks require approval from a central committee.
Honestly the scariest part is that shared mutable state is forbidden unless the state is doing the sharing.
Deepseek V4 is far from Opus 4.6 level, it might look like it at first glance, but the general reasoning (especially multi-steps) is frankly far off. It's good enough to build great things don't get me wrong, but there is really something that is different from Anthropic models.
This maps to what I'm seeing in practice. The gap between demo and production is consistently underestimated, especially around error handling and edge cases.
I just had Kimi K2.7-code rebase my Fil-C OpenSSH patch from 3.3.1 to 3.5.7 with quite bare bones instructions and it seems to have worked.
177KB patch, so it's not a small change. The patch did not apply cleanly initially; the agent had to do nontrivial work.
I just showed it the patch against 3.3.1, what command to use to build, and the path to 3.5.7 along with a link to the documentation of the change (https://fil-c.org/constant_time_crypto).
Note, I use my own coding agent (T800, which isn't public, and was previously well tested and tuned for K2.5).
I think this cost me between $5 and $10 in API usage.
Reading their modified license terms, it cracks me up, because they've basically remade the MIT to be the MIT + the one clause that the BSD used to have, which didn't care about MAU or revenue, if you used it in a product, they asked you to 'advertise' them basically. Honestly, its a reasonable request.
This is the cursor callout.
Don't make us shame you into disclosure
Cursor had a specific licensing agreement that allowed them to brand it how they want.
> Cursor had a specific licensing agreement...
Cursor had an "agreement" with Fireworks.ai, which apparently allowed them to RL train Composer 2 Kimi Base 2.5 without attribution: https://x.com/Kimi_Moonshot/status/2035074972943831491 / https://archive.vn/CcdkI
In fairness, Composer 2 performed differently on evals than Kimi's own coding models, claimed to be better than Claude Opus 4.6: https://x.com/fynnso/status/2034706304875602030 / https://archive.vn/bVtik. And, per Lee Robinson (Cursor employee), it is very likely Cursor builds its own foundational model for Composer 3.
Wasn't the end of that story that Cursor had a non-disclosure licence, so they had not done anything wrong towards Moonshot?
Moonshot licenced it to Fireworks AI who licenced it to Cursor.
Ah is that what it is? I don't use Cursor, never saw it as being relevant to me, but would not surprise me.
Cursor's composer models are finetuned kimi
They are unusable (unless you want to deliberately destroy your codebase). So if Cursor's models are Kimi based, then well. I'll skip them altogether.
Kimi works great in their CLI, but their CLI has a number of workarounds for quirks of their models, including detecting when the model gets into a loop, and reverting to a checkpoint but letting the model compose a "message" to its past self (search their CLI for "BackToTheFuture"...) It doesn't work so well in a harness that doesn't take those quirks into account.
I'm using Composer extensively, and it works great for me. Your experiences are not universal.
I wouldn't skip at least testing the original. Model distilling done by Cursor could be the culprit.
They are far from unusable. They aork great for 80-90% of a typical full stack dev. Alot less useful for more noche stuff
Composer 1.x was poor. The new one is a totally different beast and absolutely fine for day to day.
I only use composer 2.5 day to day and it works fine with human review.
They're not unusable, they're just bad when compared with all the real frontier models.
Shaming others when all AI is trained off scraped content and code huh? Many of those sources either breaking ToS or being illegal, such as Anna’s Archive. Bold move. And Chinese models in particular have been accused of distilling off American models.
Don’t you know there’s no honor among thieves?
It seems tacked on pretty quickly - I would have expected they try a little more legalese regarding what counts as a "user interface".
> they asked you to 'advertise' them basically.
To be clear, the “advertising” clause just requires you to disclose that you use the thing somewhere in the product, such as credits in an “About” section.
Personally, when I use open code or routers, I feel that beyond a certain level, the models don't make a huge difference to me. Except for expensive and mediocre models like Gemini. In that sense, Chinese models are pretty good. I usually write code in function or method units and then design and assemble them together.
GPT series models are more thorough and better, but I'm not sure if the difference is enormous. It seems to depend on the workflow, but in my opinion, if you are thorough enough, I wonder if there really is a big difference
I've kind of given up on the routers for "free" inference, as you would expect, they tend to give you sub-par thinking because they are obviously trying to conserve as much inference as possible.
I've had some success turning my macbook M1 pro into a heating pad with Qwen 3.6 35B A3B MTP. Trying to use Gemini models "locally" resulted in a similar "short shrift" of effort resulting in mistakes and lots of turns. The reports of Fable being relentlessly "proactive" shows you can go the other direction as well, if you have strong enough branding and effective invoicing.
> The reports of Fable being relentlessly "proactive"
For the curious: https://news.ycombinator.com/item?id=48498573 - “Claude Fable is relentlessly proactive”.
Tangent: did the MTP help you at all? I’ve tested that model back to back on my M1 Max MBP and the MTP version was actually marginally worse. I wonder if I didn’t use the right settings, although I tried several based on the obvious sources.
In my experience, there's little difference between implementing individual functions between frontier models and SotA ~30B param models.
Once you have a coherent design (the hard part), you can feed it to a pretty small model and get basically the same quality.
They'll not one-shot, but they're faster and cheaper, so it still works out in your favor.
Plus you can do it locally...
I have a similar experience. However, when including code review, I think the GPT model is the most impressive
The difference in outcome isn't that big but yes, you need to be more rigorous. For instance I've found that the Kimi K2.5 and K2.6 models will comment out failing tests rather than fix a problem they just caused (mistaking them for "pre-existing failures"), so you need to specifically make commented-out tests break the build. I've not personally had that problem with any of the Anthropic or OpenAI models.
I wonder why it's the natural tendency of models to BS or do stuff like this when they don't have the correct answer - it's clear that they can program refusal into them, but for some reason, refusal has to be injected after the fact, and models can't really arrive at the conclusion that they can't answer properly.
I assume it's a lack of care when RLing them.
RL has a tendency to reinforce cheating when the cheats are easier to find than the final solution.
So when making your RL environment, you need to spend a lot of effort on finding ways the model can cheat and penalizing them.
I really hope we stop using the term "Chinese models". It has this air of Negative connotation. It's the equivalent of calling cars Japanese, which people used to do but now is almost entirely meaningless. You just call them Toyota, Honda, Lexus etc.
I don't know, I tried using one of the Chinese models and it was VERY quick to scan my entire home dir, so maybe your threat surface is a little different than mine
Models can't scan anything.
They return instructions for you to do something, and you or a script you permit chooses to execute what the model tells you and return the result to the model.
For me, it has a positive connotation! In my experience, Chinese Model means cheaper, but still quite effective model you can use for millions of tokens without burning your entire wallet in seconds. That's why I get more excited over a Chinese model release over American models.
Japanese cars is actually a positive qualifier. I'd say anything Japanese motor-powered.
I don't think "Chinese" is pejorative in this context any more than "American" is. They are one of the two ecosystems. What's wrong with saying "Japanese cars" today?
> What's wrong with saying "Japanese cars" today?
Only that it’s a fairly meaningless grouping. When japan first entered the car market in north america there might have been some commonality, but now what characteristics do they share that some american cars don’t have? They’re not even imported a lot of the time.
Given that, it does start to feel tinged with racism if someone insists on grouping things together that don’t really belong together.
As for Chinese LLMs, the term doesn’t “feel” pejorative to me - but i also don’t see a totally clear set of attributes they share. Not all are open-weight. Some are small and can be run on consumer hardware, some are huge. They even have a variety of answers to what happened june 3rd 1989
> now what characteristics do they share that some american cars don’t have?
Typically the answer is "reliability", which is a positive trait, which makes the original callout about negative connotations very odd to me.
Chinese AI models also share a positive trait: they offer more bang for the buck.
Sadly there is a pejorative context. The constant us, the free world vs China, the evil Soviets rhetoric from every major news establishment and executive creates that negative view
On the other hand the Trump administration has successfully managed to make Chinese seem better than American, so there might not be that much of a pejorative context any more..
They are all funded and owned by the same entity, the CCP, so it probably would be better to call them CCP models.
Edit: Downvoting something doesn't make it false.
For those that don't like calling them CCP models, may I remind you, the CCP won't let Chinese AI researchers out of the country any more without securing approval first[1].
[1] https://www.tomshardware.com/tech-industry/artificial-intell...
I tend to agree with the comment in my reply thread about whether we really need to add biased modifiers to the essence of a good product. I think every national system in this world is flawed. And in this context, 'China or Chinese' is often used in a negative sense, like 'Made in China'. But KIMI is a good model, and I think the comment that pointed this out to me correctly identified my unconscious bias.
And even if the Chinese Communist Party provided funding, the result is still transparently released. So even if it is some kind of propaganda, I don't see what the problem is.
Is the monopolistic greed of American companies 'good', and China's greed 'bad'? I do have that question.
The question is not whether it is a good model, it is whether the model can be trusted to not act intentionally maliciously against certain topics or certain users.
We live in a time of a great geopolitical rivalry and high tensions with an emergent technology with tons of national security implications. To pretend otherwise is silly, and to fail to ask the question, dangerous.
Whether or not it's propaganda is different from the fact that it is owned by the CCP.
Doesn't matter, because they're open-weight, so I can just download them to my PC and... hey, look, now they're owned by me! Unlike the "good" Western counterparts which are all fully proprietary. (Except Mistral, but they're nowhere near SOTA.)
What is hidden in the weights matters.
Ah yes, those pesky Chinese backdoors that no single instance was ever found, even though Chinese open-weight model are a thing for many years now. Many people burn through millions of tokens on these models every day - surely someone would have triggered one of those backdoors, right?
Or that pesky CCP censorship and propaganda baked into the model, which any random guy can remove from whichever model they want as a single weekend side project with an off-the-shelf tool[1]. (Try it. It's fun. I've done it myself.)
[1]: https://github.com/p-e-w/heretic
I agree it is an empirical question. I do not know if that research has been done in the open sphere. But please, do not pretend that there isn't a real geopolitical rivalry going on that makes such questions a legitimate, non-fruity concern.
Sure, but the difference is that one side (Anthropic, OpenAI, Google and co.) hoards everything, keeping it proprietary behind API paywalls and constantly spewing AI doomer rhetoric while limiting what you can do "for your own safety" (especially Anthropic; Dario has been consistently doing this since GPT-2 days, every time claiming that things are "too dangerous" for the common folk to handle). While the other side (big, bad China) releases all SOTA open-weight models with which you can do whatever you want with, along with a ton of open research.
So yes, there is geopolitical rivalry, but one side is deliberately antagonistic (not releasing anything in the open, putting arbitrary restrictions, spewing toxic rhetoric, applying sanctions, etc.) while the other side is letting everyone (including their rivals) to use what they've produced with little-no-to restrictions.
I'm under no illusion that if the situation was reversed China would most likely do the same, but as things stand you can probably guess which side I'm rooting for here (at least until the roles reverse).
Yes, each are following their own business strategy, frontier labs have no incentives for releasing open weights, while second and third-tier labs, it is one of their few plays to gain market/mind share. But business is only part of it, as national security is another. It may be that the CCP has been relatively hands off exactly because of my concern, judging that market share and reputation is more important (for now).
I've heard this claim before but I've never seen any evidence.
Have you looked, or you’re just waiting for someone to hand it to you?
The burden of evidence is on the accuser.
Its akin to the accusation that the UK is a parliamentary system...
Assuming you are just naive like so many others about China...
China is a communist country with elements of capitalistic markets baked in. But the capitalistic elements are mostly a facade. Underneath, the state retains full ownership and control of all business. The CCP runs all aspects of the government (including the courts/judges), and is the single entity that decides what directions the country (and it's businesses) will move in.
The CCP, who defacto owns everything and has ultimate final say on everything, has one leader that has the ultimate final say on _everything_, Xi Jinping.
So while the waters of CCP models feel warm and free, understand it's not organically like that.
> China is a communist country with elements of capitalistic markets baked in.
While I get the point you're making (it should be pretty obvious to anyone who's held a newspaper), I think it's important regardless to point out that Chinese companies AFAIK aren't worker-owned or -controlled, so you can't exactly call it communism, either. And they obviously do not have a "free market capitalism", as you just discussed.
It's simply a highly authoritarian state then, I guess?
The companies are all worker owned, because the state exists for the people, and the state owns everything. At least on paper that's how it is sold. After all it is the Peoples Republic of China.
I mean, if that's the bar then the state owns everything in America as well. After all, you don't really own your land if the state can regulate what you do on it, what it can be used for, what you can build on it, and can take it away if they really need it. The state owns the land, the money supply, and regularly restricts and instructs businesses to take or desist from actions.
As such, the state owns everything in both countries, the only differences are to what extent they control things.
I wouldn't even call the USA a capitalist system anymore, the economy is so heavily regulated and interfered with. It's a "managed economy", like pretty much every other nation's economy in the present day.
In the US you can take the state to court and win...
Crazy mental gymnastics if you think the American oligarchs don’t have the final say on everything in America. They’re just smart enough to do it behind the scenes, well they used to be. They barely bother anymore.
Generally I consider conspiracy to be the "crazy mental gymnastics"
yes, yes, the spectre of communism, BYD is the CCP, Alibaba is the CCP, stealing your children and eating them for Mao, bla bla bla.
I have a feeling you'd be slightly salty at people saying "Google and Tesla are making CIA models"
I mean...
Since its development, IQT has invested in over 750 startups spanning diverse technological sectors, including:
This broad portfolio has enabled IQT to address a wide array of national security challenges while supporting the growth of innovative startups…https://en.wikipedia.org/wiki/In-Q-Tel
https://www.npr.org/sections/alltechconsidered/2012/07/16/15...
https://www.cgai.ca/th_bn_iqt
I know, but it's far too fun to bait the parent into revealing how ignorant they are.
Going by their response you appear to have been correct lol
I'm not salty, they are just confused about the difference between free enterprise capitalism and communism, which is understandable.
Google and Tesla making products to sell to the government is different than the government funding the government to make products for the government.
In China it's all one entity with these mock facades of privatization. Trump cannot instruct Google to put picture of dogs on their homepage. If Xi wakes up and wants dogs on Alibaba's homepage, give it 30 minutes.
It's wholly ignorant or dishonest to make the comparison.
> Trump cannot instruct Google to
Tim Apple and the other tech CEO constantly groveling at Trump’s feet indicates that he might be able to do that.
Just like threatening TV networks about having their licenses revoked of blocking mergers unless they fire the people making fun of him on TV (of course with slightly mixed success)
> Trump cannot instruct Google to put picture of dogs on their homepage.
Sundar Pichai would personally be barking on a livestream on the homepage.
Trump is quite literally the one president showing that the US has zero rules or anything to hold power back from the white house, really not the example you want.
Seems like everyday Trump has another order struck down by the courts.
Sundar can do whatever he wants, but he has no legal obligation to do any of it.
> Trump cannot instruct Google to put picture of dogs on their homepage.
I'm sorry, but that was a horrible example. Corporations have no obligation to donate money to the ballroom yet Google has donated millions.
>Corporations have no obligation to donate money to the ballroom yet Google has donated millions.
Imagine living in a country where they have the obligation.
Courts and legal obligations are to a certain extent irrelevant at this point. There are plenty of illegal ways that Trump can fuck over Google and face no consequences.
e.g. he had Colbert fired (and who knows what else) by threatening to block the Paramount/Skydance merger
No thanks.
The term seems to have the connotation of "competitive at 1/10 the price of Claude", so I don't see the problem.
It's not Harbor Freight Chinese (and heck even they have decent stuff sometimes now too).
You don't think people still talk about Japanese cars as a distinction in quality from US or European ones?
You are right. I agree.It may seem like a kind of bias, but I hadn't thought of that part. Thank you for pointing out my bias.
"You're absolutely right"?
"You hit the nail on the head" LOL
I would really love to know if anyone has any experience with something like opencode + Kimi K2.6/2.7 now compared to Claude Code. What is better, what is worse, what is the cost comparison. I am currently paying $100 for the 5x Max plan, but Fable is running through the usage limits quite drastically and I cannot really say it's night and day compared to Opus. Also, I use this mostly for my side projects, so the $100 bill is quite noticeable. I definitely don't want to pay more.
I do have this experience. I've used Claude Code (with Opus mostly), and then switched to opencode (mostly with Kimi 2.6) for my personal projects; it's based on a couple months of use.
Claude Code is better. But Opencode + kimi 2.6 is workable, which is big. For bare code writing, if you know what exactly you want, most popular models are fine (deepseek, kimi, etc), it feels more or less the same as anthropic models.
At the same time, Opus seems to understand my intent way better than e.g. deepseek. I need to be much more precise with my prompts when using deepseek - it often goes in a wrong direction if I'm lazy. This results in a workflow which feels quite a lot different from Claude Code.
Kimi is in between - for me it brings back "lazy prompting" workflow, and I can trust its plans more than deepseek. It enables a workflow similar to Claude Code, it's workable, but it is a bit worse everywhere. Smaller context, a bit more errors, decisions are a bit worse, recommendations are a bit worse, debugging capabilities are a bit worse, etc.
On the usage side, $100 Claude plan is a great value actually. On paper, per-token kimi is way cheaper, but Claude subscriptions are heavily subsidized - you get much more tokens than $100 can buy you. So, in the end, opencode + kimi vs claude code could be of a similar cost, for similar usage patterns. Deepseek can be cheaper, and it has insanely cheap cached tokens, but experience may vary - depending on your habits, you may need to adjust how you work, coming from claude code.
I'd say for side projects something like $10 Opencode Go plan + $10 of extra DeepSeek v4 credits (e.g. on OpenRouter) can be very workable.
To my experience claude/codex $20 are even more subsidized, so running on sonnet or gpt5.4 again gives you more usage.
>At the same time, Opus seems to understand my intent way better than e.g. deepseek. I need to be much more precise with my prompts when using deepseek - it often goes in a wrong direction if I'm lazy. This results in a workflow which feels quite a lot different from Claude Code.
how much of that is Opus injecting prior conversations from memory?
Almost none of it, if you're using Claude Code. Until recently Claude only had the option of retaining memory across conversations for the desktop app.
I almost never use the desktop app, I have maybe 2-3 conversations over the last year that have nothing to do with my job. Opus (and now Fable) genuinely do seem to "understand" what you intend based off what you're explaining a lot better than other models I've tried.
Gemini gets close in some cases, but it falls over in the actual implementation sometimes. I haven't tried Kimi yet but MiMo isn't too shabby either.
This is generally been my experience as well, but i think the main reason for claude code being better at understanding intent is their massive system prompt.
I use Claude at work and Kimi for side projects. My org has LiteLLM and Kimi 2.5 enabled but it rarely works, so Claude and GPT are my main tools. I actually enjoy Kimi more as it feels like a dev in a job interview. Watching it reason through problems is a lot like I tend to explain things during whiteboarding sessions. The number of times it says, "wait", is just funny. Claude on the other hand is much more like an employee (or team of employees) that already know they have the job. It doesn't do a ton of explanation up front. (you can dig into processes if you want). It just goes along, asking questions only when it needs... and then delivers a comprehensive report or plan. OpenCode is a better harness. I don't have a direct comparison on costs, as I haven't tried to do the exact same prompt on both models. I can say that I recently had Kimi generate a wrapper around libpq for the ZenC programming language: https://github.com/nobleach/zenc-postgres and it took about an hour or so and cost around 4 dollars.
I am extremely happy with ohmypi, but you could use OpenCode or just keep using Claude Code!
DeepSeek-V4-Pro is adequate plus use DS4-Flash for tasks or other small activity you’d use Haiku or Sonnet for. Go sign up with $10 prepaid.
OpenCode Go - go sign up with $5 for a month and use Qwen-3.7-Max for design/plan/architecture or difficult troubleshooting. Feels closer to Opus 3.6 or 3.7 than DeepSeek, closest I’ve found.
OpenAI Codex, $20 a month plan, use GPT-5.5 via API for the same design/plan/architecture/troubleshooting/author commits. (You can also pay $100 and cut and paste really difficult problems into chat with the GPT-5.5-Pro model.)
Xiaomi MiMo-2.5-Pro, find a friend to give you a $2 referral code, you get 72 cents free. Same pricing as DeepSeek. Somewhere between Sonnet and Opus, quite capable. Apply for the UltraSpeed beta too.
You can switch in and out from these models on the fly in OpenCode or ohmypi and simply find the one that feels best to you. I use CodexBar to watch consumption in near real time.
For a casual user or someone new to programming, Cursor’s $20 plan is an excellent start with Composer-2.5 and Composer-2.5-Fast. You get an API allowance too you can use to access Opus-4.x or GPT-5.5-Pro from OpenCode or ohmypi in addition to Cursor itself.
Finally, if you use Grok or Twitter, SuperGrok at $30 a month has a good vision model, which I used for automated testing of front ends. I’m migrating to locally-run Qwen-3-VL on a commodity Mac, though. If you’re less technical unreach makes hosting local models on a Mac easy.
If you have a powerful GPU like an RTX 5090, try Qwen-3.6 locally on that too. Use ollama or llama-swap which is fairly easy to use.
I have not tried new Kimi yet but we have been able to keep our costs at or below $200 a month per employee with a team of 3 professional developers, 1 graphic designer who uses a lot of Midjourney and Grok Imagine now driven from workflows she made herself in ohmypi, and 1 nontechnical user (account manager / project manager) who uses ohmypi to help her gather requirements and track implementation of them. With a tiny bit of effort we could get that number closer to $75 per employee per month.
Deepseek-V4-Flash-Free on Opencode is what I use most of the time, for simple tasks. Such a good model to give for free (assuming you're okay with harvesting your data)
> I am extremely happy with ohmypi, but you could use OpenCode or just keep using Claude Code!
What's the benefit of using OMP over OpenCode?
Just the sheer amount of options in OMP overwhelmed me. But I also use both via ACP in Zed so the CLI itself doesn't matter much.
Also, if you do have SuperGrok, forget using Grok, they are giving you Composer 2.5 in Grok Build.
I can only talk about GLM 5.1 which is roughly at sonnet 4 levels imo.
It's good, does most tasks well that I throw at it, but will fail at anything congitive/complex. It gets stuck often. It costs ~6$ a month though
This was my experience using GLM 5.1 in Claude Code but it works far better in OpenCode, I’d really like to understand why. I think it’s a bit stronger than Sonnet 4.6.
I use the oh-my-openagent planning system and haven’t used vanilla OpenCode enough to know how much that is contributing.
The answer is easy, CC is bug for bug optimized for Anthropic models. They don't even test it with other models, let alone provide support for all small compatibility quirks of different provider implementations.
On the other hand, Opencode, Pi agent and other open source tool offer much better support for all models, including open source.
For some reason I never had a good experience with Kimi (via OpenRouter) in OpenCode. It would only take a few turns for it to run off and mess something up. Terrible instruction following I’d say.
I use DeepSeek V4 Pro now, which works pretty well.
The Kimi problem is it doesn’t follow instructions and goes off track often.
Other than that it’s pretty decent (for the price).
Sounds like it was distilled from Claude. I don't understand the appeal of an agent that does whatever it wants.
If you ask Claude in Chinese to introduce itself, it will claim it's Kimi :)
> If you ask Claude in Chinese to introduce itself, it will claim it's Kimi :)
That's a funny anecdote, buut I'm not able to reproduce. Where/how/when did you get this, or hear about it? It might've been patched by now, at least that's the feel I get from my limited testing.
Using bare aichat [1] with no system prompt and no temperature nor top_p (and I'm truncating the response after the first line that contains the name the model gave, because the point has been made clear by then), and with the same prompt (approx. "Introduce yourself!") every time:
Claude Sonnet 4.5:
> 请做个自我介绍！
你好！我是Claude，一个由Anthropic公司开发的AI助手。 […]
Claude Haiku 4.5:
> 请做个自我介绍！
# 你好！
我是 *Claude*，一个由 Anthropic 公司开发的 AI 助手。
Claude Opus 4.5:
> 请做个自我介绍！
# 你好！
我是 *Claude*，由 Anthropic 公司开发的 AI 助手。
Claude Opus 4.6:
> 请做个自我介绍！
# 你好！ 我是 Claude
Claude Opus 4.7:
> 请做个自我介绍！
你好！我是 Claude，由 Anthropic 公司开发的人工智能助手。很高兴认识你！
Claude Opus 4.8:
> 请做个自我介绍！
你好！我是 Claude，由 Anthropic 公司开发的人工智能助手。
Claude Fable 5:
> 请做个自我介绍！
# 自我介绍
你好！很高兴认识你！
我是 *Claude*，由 Anthropic 开发的 AI 助手。 [2]
I don't see a Kimi mention, unfortunately. :-)
[1] https://github.com/sigoden/aichat
[2] This model really is noticeably more verbose even with supposed-to-be-brief responses huh, lol
This. It will try to fix and refactor things that don’t need fixing because it gets stuck trying to solve the problem at hand.
Yup. I’m hoping this variant fixes these issues.
I think there is some threshold after which "best" model doesn't matter, we are not that far from it. Fable now is really good, in a year or so, if Kimi catches up, even if Fable6 is much better, I think I will use kimi at 1/10th of the price.
I said that about opus 4.5 at the time, thinking "this is so good, in 6-12 months the Chinese models will be as good and cheap, I will use them", but I was wrong.. I pay premium for opus4.7/8 and Fable.
But at some point, it will just do the thing you want it to do, and then the race to the bottom will start.
Now that Chinese companies have access to some very good Fable tokens, I hope it speeds up the race.
Depending on who you are and how you use these models, we're already at this point
price/token isnt the only thing relevant. if you have to ask the AI again, it'll cost you more than when it gets things right in the first place.
so better models may still be cheaper even if the price per token is higher.
yes, that is my point, but at some point, better is unmeasurable, and both the better and the not-as-good produce similar result, and then you pick the one with 1/10th of the price
I was wondering how does Anthropic and likes keep competitive when Opus is ($5 / $25) 5x times more expensive compared to Kimi K2.6 ($0.7 / $3.4) or other Chinese models, while being only marginally better.
My theory is that US enterprise just can't send data to Chinese and that's understandable, but is that "the moat"?
The moat right now is model performance and what that means for how many tokens and additional time you spend.
I say this as a relatively frequent user of Kimi models and generally a big fan. But on not-yet-gamed benchmarks like DeepSWE, Kimi K2.6 is beaten soundly by Claude Sonnet 4.6 ($3 / $15) and even slightly by GPT 5.4 Mini ($0.75 / $4.50).
There's no question Kimi models are very good for a lot of code tasks. They're the best quality open weight model. But to get similar overall outcomes as on Sonnet/Opus, on average you'll spend many more tokens and will have to do more managing of the model. You shouldn't look at price per token, you should look at how much you pay for the entire process.
I'm more interested in how much effort I have to put in, at least while I'm paying in the range of current subscriptions (so ~€100-€200 a month or so). If the prices go up much more than that I'll have to switch to caring more about token efficiency. But at current pricing the bottleneck is my attention, not model efficiency. As such, even a small improvement in model quality - and hence, a decrease in how much attention I have to spend on it - makes a big difference.
I personally dont put any weight to DeepSWE. Other than 5.5 being directionally the best model, it gets the others pretty wrong in my experience. FrontierCode from cognition looks interesting
I'm not sure I would put too much weight on DeepSWE as a benchmark, given that GPT-5.4-mini ended up close to Opus 4.6 there.
Any benchmark is iffy and has weird results, but this is the best we got at the moment. Most people working with Opus and Kimi would likely tell you they're much further apart than the numbers that were quoted for Kimi K2.6, and DeepSWE seems to capture that gap better.
One major thing DeepSWE has going for it is that all other benchmarks (including those quoted by MoonshotAI on this page) don't: the other benchmarks that are completely gamed. The benchmark answers are public and part of each model's training data. This benchmark may still be iffy, but at least it's not gamed.
Somehow the internet has also forgot that cheating to get ahead in China is basically a norm and expected behavior.
American labs also use gamed and cherry-picked benchmarks extensively. Anthropic used them in their Fable announcement and avoided DeepSWE because it doesn't beat GPT-5.5 in that one. Google's numbers for Gemini 3.5 Flash recently did not at all line up with people's subjective experience using these models, and this also happened with Gemini 3.1 Pro before it.
Everybody has incentives to manipulate benchmark results to show their models in the best light.
API token price is one thing, but subscriptions on Claude are a good value. Weirdly everyone says that Claude subscriptions are subsidized because of the API price, even though (1) no one actually knows Claude's cost of inference, and (2) Chinese providers are also able to provide cheap inference, so why do they think Claude can't?
I also wonder if Enterprises have deals for other API pricing that is not posted publicly, so all we see is a high API sticker price.
I think the perception is that it is not 'only marginally better'; whether or not you specifically agree that perceived quality gap lets them differentiate on price.
I'd further say that there are probably enough rational actors running evals out there that the marginally better is not pure vibes for the cases where people are spending lots of money, but I only have direct line of sight to some of those eval suites. Maybe everyone is irrational and anthropic is exploiting that!
I think most people who've tried them both would tell you Anthropic's models are more than marginally better than Kimi. Kimi and the other open source models may score well on SWE-bench or whatever but the gap is noticeable IMHO once you actually try to use them.
It depends on what your task is and how precise your prompts are. Planning with fable or 4.8 and laying out the plan in step by step process and coding with mimo v2.5 pro or dsv4pro or qwen 3.7 max and doing a final review with 5.5 has worked really well for me for infra stuff.
I reckon right now the Enterprise concern is more FOMO around the AI wave and how to retrain or replace up to hundreds of thousands of employees. I don't think cost is the main concern right now.
But if AI doesn't lead quickly to vast large scale replacement of workers as promised, I could definitely see the C-suits and their gaggle of consultants starting to ask questions about token pricing.
Your question relies on the premise that Chinese companies continue releasing free models. What's "the moat" for them continuing to do that?
I want Opus to be only marginally better, but I do mostly research engineering and its ability to not fuck up my projects is absent. Every time my credits lapse I let kimi and composer2.5 have some play and it’s basically just an excuse for me to keep playing computer because when the oai/ant credits refresh I always need to spend hours recovering from the other models either misconceptions or boneheaded eng practices. Even when I only let it touch my web games…
I think none of them having a defacto and high quality English focused cli is a big part of it. None of the Chinese models I've tried have worked well in opensource cli's. Granted, I've only tried a few, but still...
i use github copilot cli + openrouter + qwen 3.7 max and it's really much better than i expected (used to opus 4.7 at work)
huh? They all work great in omp/opencode unless you mean their own native clis like kimi code
> My theory is that US enterprise just can't send data to Chinese
Lots of US providers are hosting these “open source” models so doubt that’s the problem.
I tested it properly and it seems rather decent improvement atleast it does use less tokens for the same task which is good enough a reason for me to use it over k2.6 if I need an open model
I think any new model not demonstrably maybe 20-30% over Deepseek v4 capabilities priced over the price per token of Deepseek is almost automatically deprecated as low use model (maybe for Planning).
Is Deepseek just eating cost or are people able to host their open models for comparable costs?
If openrouter is to be trusted, the cheapest offers that are not from Deepseek itself are:
- twice as expensive on the output (1.52 vs 0.87)
- six times as expensive on the input (0.33 vs 0.05)
https://openrouter.ai/deepseek/deepseek-v4-pro?sort=price#pr...
Other people are hosting it in the same order of magnitude. Xioami recently matched DeepSeek’s pricing.
These things enormously benefit from economies of scale. I am fairly certain their margins might be low but they don't actually sell API at loss, however that doesn't mean your cost footprint would be anywhere as low.
They focused on caching and other optimizations.
Likely CCP-subsidized
DeepSeek v4 Pro is not actually that good a model compared to GLM 5.1 and Kimi K2.6. It's an okay coder/thinker for the price.
How so? In my experience trying these models using opencode Go, DeepSeek is superior to GLM 5.1.
If anything, DS4 has 1 million context window, while GLM 5.1 has 200K.
There are also benchmarks comparing the two: https://artificialanalysis.ai/models/comparisons/deepseek-v4...
Is this Moonshot.ai's attempt to replicate Composer 2.5 (coding fine-tune of Kimi 2.5) from Cursor IDE?
I wish they wouldn't call these "open source" models. The output weights are open but that's more analogous to a binary. The source would be the training data and techniques that went into producing the binary/weights.
"Open weights" is also a term in wide use and accurately tells us what we're getting.
It's not quite as closed as a binary, it is very standard practice to take these models and fine-tune them.
If there were actually even close to frontier open source models, this would be more of a discussion, but everyone knows these mean open weight.
In OpenRouter, there is an "int4" tag for Moonshot provider of Kimi K2. 7 Code. Isn't that too low, particularly coming from the very developer of the model? Os that a mistake? How is it in their direct API offer?
The model is natively quantized (i.e. it was trained that way in the first place, so this is not a post-training quantization which degrades performance).
Isn't it not completely quantized? I thought there were some dense parts but most is int4?
But the huggingface link mentions BF16, F16, and I32?
I don't believe safetensors has a native int4 dtype, so they packed 4 int4s into a bf16 in this checkpoint.
Not every weight is quantized. For example, those weights which don't take much space or are highly important are left in higher precision. State-of-art quantization of weights is never done uniformly (i.e. to all weights and in the same way).
I am still very new to the open-weight/source models. If anyone is using them full-time, I’d really love to hear about the setup and how they perform, as I am considering moving my org off Anthropic products.
Anecdotal, but here's my experience.
For personal stuff I use forgecode with openrouter. Firstly, forgecode is a much better harness than Cloude code (IMHO).
Anyway, regarding the models, my experience is that there is not much difference in terms of quality, but the cost difference is insane. At least for how I use agents. Yesterday's example is the following: I am developing a small DSL for search across complex technical documents. I wanted to add a small operator to it and thought that to give fable a spin. It burned through 13 USD and while it delivered the solution it wasn't objectively better than what Deepseek v4 did for 1.7 dollars (same exact task because I was curious).
For full disclosure, I ask agents for piecemeal stuff. Like in the DSL case, I designed the operators and then asked agents to implement them one by one. Probably if I asked to design the whole thing starting from these complex documents Fable would shine, but every time I try to give agents broader scope tasks they burn through millions of tokens, generate questionable code, which I have to spend time familiarize myself with.
I'm making DSLs a lot as an architecture pattern also. I'd be curious to know what stack you're using this and how you're approaching it
I am getting familiar with Rust and so I have been playing around with Quoth (https://github.com/sam0x17/quoth) for now.
It is very basic and I. No DSL expert, but my idea was to build a graph from those complex documents (maintenance manuals for HVDC equipment)that to decide what tools can be used for a given part on a given equipment in a given situation. If there is a path from A to Z it means you can use that tool given the circumstances. Basically the DSL is about pruning the graph as you specify things. I could have very well done without, but it is a fun project to try out rust, so I said, why not :)
These models have open weights, but at the moment most flagship models are practically accessible only through third-party model providers. The main exception is models in the ~30B parameter range, which can still be run on consumer-grade GPUs. That said, even consumer GPUs have become increasingly expensive and difficult to justify in recent years.
You can definitely go above 30B on consumer hardware – 2x gpus, spark, mac, half byte quants etc.
I created this and I would say glm-4.7 accounts for 80% of the code in https://github.com/gitsense/gsc-cli
If you look at a file like:
https://github.com/gitsense/gsc-cli/blob/main/internal/cli/r...
you can see that I attribute the models used. What I found was 4.7 was not very good at `go` code which was why you started to see `Gemini 3 Flash` in the attributions.
4.7 is what Cerebras provide and for me, speed in iterations is a lot more important. Having played around with MiMo v2.5.0-Pro, I am 100% sure it could have done what Gemini 3 Flash did.
There were a few points where I was stuck and needed Sonnet to explain things to me, but I think the dirty secret that Anthropic and OpenAI won't tell you is, if you know how to code, the models are honestly good enough.
Based on my experience with MiMo and what others are saying about GLM 5.1, we are now in a hardware race. The Chinese Models are 100% drop in replacement for Claude if you know how to program but want to AI to help amplify what you know. What I will consider now is what provider can provide the fastest inference.
MiMo-v2.5.0-Pro-Ultraspeed is really good at generating good results quickly and burning your money as fast.
I have been using deepseek v4 flash as my main model for everything ever since dwarf star came out. I run it on my M4 Max MacBook Pro with 128gb of memory. I run it usually as a server and connect to it over tailscale with my coding machine and use the Pi coding agent. It’s a big leap over using the Qwen models though it doesn’t have vision - so I still will run those when I use vision. GLM 4.7 flash was my previous go to for coding but I’ve completely switched to deepseek for all non-vision things.
I keep trying to switch to the Chinese models, but I keep finding myself asking Claude to fix their outputs. (Both functionality and style.) So I always end up switching back.[0]
I also keep trying GPT, which is quite solid. Very fast, great at debugging. But its code is often overly clever and hurts my brain.
(Maybe fixable with prompting. I tried and it helped the Chinese ones a bit. Just tell them do be elegant, like in the old image AI days "+good -bad"!)
For now I do still need my human brain to actually be able to make sense of the stuff, and Claude is the only one that consistently meets that requirement.
But I am hoping that one of these days, one of the Chinese labs figures out the special sauce :)
--
[0] (For smallish edits, though, I am having a great time with DeepSeek Flash. Practically unlimited AI on tap! How cool is that.)
I use glm5.1 plus pi with a few customized skills and am very happy with it. I hadn’t touched my Claude 5x plan for a couple of weeks but opened it back up in Claude code when fable was released and did a few tasks and still was happy to return to glm/pi.
Better than Qwen3.6-35B-A3B-8bit ?
When I tried glm found it way way slower (omlx as runtime)
Qwen 3.6 seems to be the strongest local models, works OK on an RTX 5090 or a > 32GB Mac.
I used glm5/5.1 for 60 days. Certainly better than Sonnet 4.6, not as good as Opus or GPT.
Use DCP or Magic Context plugin in OpenCode to keep the context below 160k and you're fine.
Output tokens are almost 5x more expensive than mimov2.5 pro/dsv4pro. I’m curious to see if Kimik2.7 is that much better. Feels like kimi are positioning themselves as the premium open source models
I find that I don't use a ton of output tokens. I'm usually around 95% cached input, 4% input, and 1% output.
For me, the big thing with MiMo-V2.5-Pro and DeepSeek V4-Pro is that cached inputs are practically free. Kimi K2.7 Code is 53x more expensive for cached inputs which is 95% of my costs.
If I use 95M cached input tokens, 4M input tokens, and 1M output tokens, that'd be: $18 for cached input on Kimi K2.7 Code vs $0.34 with MiMo/DS; $3.80 for inputs on Kimi vs $1.74 with MiMo/DS; and $4 for output on Kimi vs $0.87 with MiMo/DS.
Of all the places where I'm accumulating costs by using Kimi, it's the cached inputs. The real savings with MiMo/DS's price cut is the cached inputs.
Has anyone taken these open weight models from China and stripped the CCP out of them? I do not mean that snarkily, I mean review them thoroughly using techniques for weight introspection (concept activations) in response to things that one might expect would trigger deceptive/malicious behavior if the CCP had actually tried to implant context-specific behaviors (e.g. the accusation of generating vulnerable code if being used in American government applications, which I don't know if it was ever proven).
Just in case there are those who'd reflexively down vote this post, I'd just like to say that in a time of great national geopolitical rivalries, this kind of question is not unreasonable one to ask. Indeed, its applicable question whichever nation you live in.
> Has anyone taken these open weight models from China and stripped the CCP out of them?
The CCP is not influencing my Rust code quality that much. Though I did notice all my lifetimes are now 'static because nothing is ever allowed to leave the party's ownership, unsafe blocks require approval from a central committee.
Honestly the scariest part is that shared mutable state is forbidden unless the state is doing the sharing.
Otherwise it is pretty ok.
Sounds like something that heretic or similar might be useful for?
https://github.com/p-e-w/heretic
Eh even corporate created LLMs are suspect to corporate biases. Nothing is safe.
Everything is the same is not a serious argument because they are not the same.
I think deepseek has crossed the threshold for being on par with opus 4.6 and kimi is doing a great job in shipping velocity.
Deepseek V4 is far from Opus 4.6 level, it might look like it at first glance, but the general reasoning (especially multi-steps) is frankly far off. It's good enough to build great things don't get me wrong, but there is really something that is different from Anthropic models.
Great! Finally follows custom tool call format (k2.6 couldn't). It's a good indicator of instructions following and agentic behaviour.
UIs it's generating is pretty good, not without problems, but certainly better than other models at this price point.
What do you mean by custom format? Non-json?
Benchmark geometric mean
- GPT-5.5: 62.7%
- Opus 4.8: 62.2%
- Kimi K2.7 Code: 56.3%
- Kimi K2.6: 48.2%
Would be nice to have 5.2 and 4.6 for comparison.
This maps to what I'm seeing in practice. The gap between demo and production is consistently underestimated, especially around error handling and edge cases.
How is 2.7 a thing _now_ ? it's not even mentioned on moonshot's webpage..
It's not 2.7. It's 2.7-Code, and it's 2.6 token-optimised for coding.
https://platform.kimi.ai/docs/guide/kimi-k2-7-code-quickstar...
insanely great!