Don't forget the 128 bit vector ISA with 32 registers, supporting up to 64 bit int and FP, and with LMUL=8 you can process 1024 bits with a single instruction (at 3 cycles per 128 bits for most operations). Fully supported by GCC and CLANG (xTHeadVector) and compatible with RVV 1.0 with just a command line switch if you use the C intrinsic functions. (a lot of code working on 8 bit elements is binary compatible with RVV 1.0 too e.g. typical memcpy(), memset(), memcmp(), strlen(), strcpy(), strcmp())
When I bought my 64 MB Duo they were $3!
Then for a long time they were $5 for the 64 MB, $7 for the 256 MB, and $10 for the 512 MB.
Sadly, like everything else, they've gone up considerably this year.
You can buy sub-$0.50 microcontrollers. But even at $5, I don't know why you'd want to run models on them, it's an environment constrained to the point of being useless for this task.
And I hope it stays that way, I don't want MCU shortages...
Many artificial environments are useless to tasks they were not designed for until somebody experiments, tests, redesigns, and iterates.
I'll give a specific example apropos of TFA. Computer vision models were never run on MCUs because they were constrained to the point of being useless for this task, but then someone tried the impractical, and now it's trivial[1]
Regarding MCU shortages, you should be worried about the supply chain, but I don't see the impact really being from running LLMs on ESP-32s, of all things.
Fun and learning is a really good reason. It also reminds me of the damascene: trying to achieve something that doesn't feel possible, and working through all the extreme resource-constrained engineering limits.
I think most of my embedded projects aren't that useful, but they've taught me a lot.
I'm not disagreeing with you, I think this goes beyond impractical, it's doomed from the get go.
In my book, impractical means "I built a cuckoo wristwatch". Beyond impractical: "I built a cuckoo wristwatch but there was no room for a working mechanism".
I don't see the relationship between "fun and learning" and "(beyond) impractical".
I enter most of my learning project from the assumption that I could just buy/install whatever I am building and save time/money.
Please consider seeing things from a different perspective than "your book".
Not saying this to antagonise you, but because a lot of time reading comments like this makes other posters less willing to share their impractical efforts, and would love to read more of those, not less.
How is it useless? If it has an NPU it is literally built to run models.
You're just extremely biased in what you consider to be a useful ML model. For example, for some strange reason you think only LLMs exist. The model must be as big as possible or else it is pointless.
Training custom non-LLM models for specific tasks so they run on a resource constrained device? You must be insane.
Well, that's sub-$0.50. But yeah, CH32V003 is in that ballpark, and some of the cheapest Microchip and Infineon products are around $0.20.
It's almost never worth it to buy the cheapest chip unless you're making a million of something, but there are very good ones around $1-$2, and $5 is the upscale stuff.
This is a really neat use of the per-layer embedding trick. It's also worth noting that there viable TTS models that are ~20-30M param, so it might mean you can have a ESP32 with no network access read stuff out to you in near real time!
One of the things I have been wanting to try for a while now is something like this with a layer per MCU. I have some crazy ideas with RP2350's talking to each other with dedicated lines fed by PIO going through a combination of interpolators and dual multiply instructions.
PSRAM, Flash, and even SD cards may not have the best bandwidth individually, but they can reach quite impressive rates when you have a shitton of them running all at the same time.
The large scale dedicated hardware systems will still have the edge for performance per watt, but the low entry level and slow incline does make these things quite appealing.
Depending on where you slice the model up, it can be not a whole lot of data. For instance each transformer block outputs a single vector in an embedding space.
I can see that being cheaper to bitbang with PIO than to actually compute.
There's certainly some latency stack up, but throughput should be remarkably good.
PIO to PIO between two rp2350s should be able to transfer as many bits per clock as you can spare pins for.
They have a single cycle double multiply per core, and the interpolators give you a heap of ability
The PIO can be awkward, but you can run a bunch of them at once. Going from MCU to MCU you don't even need to involve the CPU cores, PIO to PIO Comms via pins
You are obviously not going to get big TOPS from it because a Trillion is a ridiculous amount anyway. But never underestimate the power of controlling the whole pipeline.
Ultimately none of the other things I'm doing with MCUs are practical, why would this to be any different.
Pretty incredible performance for the footprint - really interested to see what could be done on slightly more powerful SBCs like some that have been mentioned in this thread.
So while SSD streaming is interesting I'm not sure it's exactly the same thing as the per-layer embedding that is being utilized in tandem with streaming here. To utilize per-layer embedding, it would have had to be trained that way, which GLM 5.2 was not.
That's incredible. Sure, not practical for most applications, but if you really want a local top tier model, you can run it on anything as long as you are patient.
As someone with a healthy amount of RAM, but just a 16GB GPU, I am wondering what kind of work I could queue up for overnight runs. I thought the best models were fully out of reach, but the 128GB CPU only test had a 1.8 tokens/second. While not speedy, you could probably do something with that given extensive coffee breaks. This speed simulator[0] demos what it looks like.
My guess is because the ESP32's flash is only ~1/4 the bandwidth of the internal SRAM. If you do this on a more powerful system not only is the gap much wider but you also have much more compute you need to keep fed with bandwidth to be efficient.
It's also mapped into the address space so there's very little extra latency in grabbing the embedding as opposed to something like nvme that will have to setup a command list, submit it to the drive's microcontroller, wait for the op to be processed, etc.
If you want to do this at the $1 price point, you can on RP2350, albeit with some limitations. In particular, it maxes out at full speed (12Mbps). The trick is to use the on-chip USB peripheral for one, and connect the other to GPIO pins backed by PIO.
This works today with tinyusb and pico-pio-usb, but I'm also playing with a Rust port which I'm hoping will have higher performance.
$8 ish gets you an ESP32-S3 board with PSRAM, flash, and two USB-C ports. The PSRAM and flash are specifically used for this LLM project. I can't find anything like that with the RP2350 for $1.
Voice-to-Text and Text-to-Voice models are approaching that size. I wonder how close we are to getting small devices that can chat with us.
Imagine a world where your toothbrush could give you tips about dental hygiene - or advertise toothpaste. What a time to be alive!
It's crazy what $5 can buy you in a microcontroller these days. Have a look at these Milk-V boards:
https://milkv.io
The duo has up to 256MB of memory, and a 1TOPS@INT8 TPU. They run Linux and are $5. I bought 5!
Don't forget the 128 bit vector ISA with 32 registers, supporting up to 64 bit int and FP, and with LMUL=8 you can process 1024 bits with a single instruction (at 3 cycles per 128 bits for most operations). Fully supported by GCC and CLANG (xTHeadVector) and compatible with RVV 1.0 with just a command line switch if you use the C intrinsic functions. (a lot of code working on 8 bit elements is binary compatible with RVV 1.0 too e.g. typical memcpy(), memset(), memcmp(), strlen(), strcpy(), strcmp())
When I bought my 64 MB Duo they were $3!
Then for a long time they were $5 for the 64 MB, $7 for the 256 MB, and $10 for the 512 MB.
Sadly, like everything else, they've gone up considerably this year.
https://arace.tech/products/milk-v-duo
https://arace.tech/products/milkv-duo-s
You can buy sub-$0.50 microcontrollers. But even at $5, I don't know why you'd want to run models on them, it's an environment constrained to the point of being useless for this task.
And I hope it stays that way, I don't want MCU shortages...
Many artificial environments are useless to tasks they were not designed for until somebody experiments, tests, redesigns, and iterates.
I'll give a specific example apropos of TFA. Computer vision models were never run on MCUs because they were constrained to the point of being useless for this task, but then someone tried the impractical, and now it's trivial[1]
Regarding MCU shortages, you should be worried about the supply chain, but I don't see the impact really being from running LLMs on ESP-32s, of all things.
[1]: https://github.com/espressif/esp-vision
Fun and learning is a really good reason. It also reminds me of the damascene: trying to achieve something that doesn't feel possible, and working through all the extreme resource-constrained engineering limits.
I think most of my embedded projects aren't that useful, but they've taught me a lot.
I'm not disagreeing with you, I think this goes beyond impractical, it's doomed from the get go.
In my book, impractical means "I built a cuckoo wristwatch". Beyond impractical: "I built a cuckoo wristwatch but there was no room for a working mechanism".
I don't see the relationship between "fun and learning" and "(beyond) impractical".
I enter most of my learning project from the assumption that I could just buy/install whatever I am building and save time/money.
Please consider seeing things from a different perspective than "your book".
Not saying this to antagonise you, but because a lot of time reading comments like this makes other posters less willing to share their impractical efforts, and would love to read more of those, not less.
How is it useless? If it has an NPU it is literally built to run models.
You're just extremely biased in what you consider to be a useful ML model. For example, for some strange reason you think only LLMs exist. The model must be as big as possible or else it is pointless.
Training custom non-LLM models for specific tasks so they run on a resource constrained device? You must be insane.
I want to run music models on the Milk-V and have them jam in realtime with me.
isn't floor price 0.10$ for last couple years?
Well, that's sub-$0.50. But yeah, CH32V003 is in that ballpark, and some of the cheapest Microchip and Infineon products are around $0.20.
It's almost never worth it to buy the cheapest chip unless you're making a million of something, but there are very good ones around $1-$2, and $5 is the upscale stuff.
This is a really neat use of the per-layer embedding trick. It's also worth noting that there viable TTS models that are ~20-30M param, so it might mean you can have a ESP32 with no network access read stuff out to you in near real time!
One of the things I have been wanting to try for a while now is something like this with a layer per MCU. I have some crazy ideas with RP2350's talking to each other with dedicated lines fed by PIO going through a combination of interpolators and dual multiply instructions.
PSRAM, Flash, and even SD cards may not have the best bandwidth individually, but they can reach quite impressive rates when you have a shitton of them running all at the same time.
The large scale dedicated hardware systems will still have the edge for performance per watt, but the low entry level and slow incline does make these things quite appealing.
Wouldn't a layer per MCU be heavily bandwidth constrained?
Depending on where you slice the model up, it can be not a whole lot of data. For instance each transformer block outputs a single vector in an embedding space.
I can see that being cheaper to bitbang with PIO than to actually compute.
There's certainly some latency stack up, but throughput should be remarkably good.
Run the numbers before you waste time here. I doubt this will work.
PIO to PIO between two rp2350s should be able to transfer as many bits per clock as you can spare pins for.
They have a single cycle double multiply per core, and the interpolators give you a heap of ability
The PIO can be awkward, but you can run a bunch of them at once. Going from MCU to MCU you don't even need to involve the CPU cores, PIO to PIO Comms via pins
You are obviously not going to get big TOPS from it because a Trillion is a ridiculous amount anyway. But never underestimate the power of controlling the whole pipeline.
Ultimately none of the other things I'm doing with MCUs are practical, why would this to be any different.
Pretty incredible performance for the footprint - really interested to see what could be done on slightly more powerful SBCs like some that have been mentioned in this thread.
While running LLM on tiny device is awesome, I'm more impressed by whatever training has produced the weights
Why can't this scale to run much larger models on CPU backed by flash with good access patterns?
Someone did this exact thing recently, but running GLM-5.2 with something like 16GB of DRAM, a standard desktop CPU and nVME SSD.
I think they got something like 10 _seconds per token_ (not tokens per second).
EDIT: it was 25GB of ram and up to 20 seconds per token! https://github.com/JustVugg/colibri
So while SSD streaming is interesting I'm not sure it's exactly the same thing as the per-layer embedding that is being utilized in tandem with streaming here. To utilize per-layer embedding, it would have had to be trained that way, which GLM 5.2 was not.
That's incredible. Sure, not practical for most applications, but if you really want a local top tier model, you can run it on anything as long as you are patient.
As someone with a healthy amount of RAM, but just a 16GB GPU, I am wondering what kind of work I could queue up for overnight runs. I thought the best models were fully out of reach, but the 128GB CPU only test had a 1.8 tokens/second. While not speedy, you could probably do something with that given extensive coffee breaks. This speed simulator[0] demos what it looks like.
[0] https://shir-man.com/tokens-per-second/?speed=1.8
My guess is because the ESP32's flash is only ~1/4 the bandwidth of the internal SRAM. If you do this on a more powerful system not only is the gap much wider but you also have much more compute you need to keep fed with bandwidth to be efficient.
It's also mapped into the address space so there's very little extra latency in grabbing the embedding as opposed to something like nvme that will have to setup a command list, submit it to the drive's microcontroller, wait for the op to be processed, etc.
>esp32-s3
This microcontroller is a beast, currently using it to do dev work on a pi4.
Having two usb ports with one otg lets you do some neat things that would cost $100+ otherwise
If you want to do this at the $1 price point, you can on RP2350, albeit with some limitations. In particular, it maxes out at full speed (12Mbps). The trick is to use the on-chip USB peripheral for one, and connect the other to GPIO pins backed by PIO.
This works today with tinyusb and pico-pio-usb, but I'm also playing with a Rust port which I'm hoping will have higher performance.
$8 ish gets you an ESP32-S3 board with PSRAM, flash, and two USB-C ports. The PSRAM and flash are specifically used for this LLM project. I can't find anything like that with the RP2350 for $1.
Entirely fair, $1 is just the chip, not the board. No question the ESP32-S3 is incredibly good value.
This is a really cool project. Thanks for sharing!
Finally, an LLM that can run on my i5
9.7 tokens/sec actually seems like a lot! That’s fun!
Super cool, thank you for sharing!