I've been waiting on this model to show up on the Deep SWE benchmark results and treat its absence/delay as an indication of how slow and unusable it is for good results. I bet it thinks to the moon on some of those complex challenges.
Simon Willison's post about this gives a good context on why exactly this is happening. While it doesn't mention this in the Artificial Analysis page, this is likely with Max reasoning, which has extremely long reasoning traces:
I'm curious if they can make up for this with insanely high tokens-per-second especially when served from hosted providers, though, given how tiny it is (37B!)
Qwen models are slower in tokens/s, compared to similarly sized gemma4 and others, and they use more tokens per task, in part thanks to that xhigh default.
On the other hand, there are some of us who are stuck with hardware that has plenty of compute, but limited (V)RAM. The new 27B is just perfect for that.
What configuration are you using? On both vllm and llama-cpp, I get significantly higher speeds from gemma4 than qwen3.6 (with their respective speculative decoding methods).
Output TPS in vllm for instance:
- Gemma4 26B-A4B: 200-300TPS
- Qwen3.6 35B-A3B: 120-180TPS
- Gemma4 31B: 80-120TPS
- Qwen3.6 27B: 60-80TPS
This is for a first request on a dual 5090 setup, with their respective speculative decoding methods.
> with their respective speculative decoding methods
You're benchmarking drafter acceptance rate, then. Which is real life values, yes, but attributing worse drafter performance to the other 95% of the model being inherently slower.
I benched Qwen 3.6 35B-A3B against Qwen 3.8 27B with the same parameters, thinking set to low. Despite 35B having 9x fewer active parameters, it benched only 2.34x slower. The 35B got only 50% more agentic tasks done per hour.
I'm running 3.8 27B locally, and the results from the past few days have been excellent. I find raw speed is less of an issue when you can trust the model more to reach the right result.
> insanely high tokens-per-second especially when served from hosted providers, though, given how tiny it is (37B!)
It's a dense model so it will use all of its parameters per token. 37B active parameters isn't tiny at all, it's almost what Deepseek R1 had, and it's 2/3 of what Kimi k3 uses, so it's not going to be “insanely high” tps: it's going to be three times slower than Deepseek Flash (Prefil speed is going to be quite high though, but not token generation).
Its 27B not 37B and having just 27B in total and 3T and like 30B active of those is still totally different. A 120B with 5B active is still much slower than a proper 5B. Just like the new Ling 3.0 Tiny with 8B and 1B active only gets around 120tk/s compared to 250tk/s which a real 1B one gets on my hardware.
On the other hand, it used about the same tokens as GLM 5.2 and got 1 point lower score.
The fact that we have a GLM 5.2-class model that can run on two 3090's comfortably at Q8 is absolutely insane. It wasn't long ago that GLM 5.2 was considered amazing for open weight models.
It’s still going to chew up context quickly. Surely, some of the added tokens are helping the model, but does it require as many as it generates? What happens on long, multi step tasks as it pushes old tokens out of context? I’m not sure we know the answers to those.
There is some special sauce that they have. It’s not just a simple quant of another release. Or so they imply. I don’t have any insight into how it works or what the Bonsai special sauce is.
And once again, Qwen 3.8 27B beats Opus 4.6, what the hell.
It's both funny and a bit terrifying and I still can't quite believe it. It runs decently on a gaming PC! Opus 4.6 came out only 6 months ago and was then broadly considered the new SOTA by a comfortable margin! How in hell did they package capability in the ballpark of a Feb 2026 frontier SOTA into 27B?!
More importantly, what's the point of building monster-scale data centers on unprecedented amounts of debt when a more than good enough model runs on a GPU from a couple years ago?
The coming months are going to be exciting, that's for sure...
I used this a lot over the weekend, and it's a really intelligent and strange model.
It gets really agentic at the higher reasoning levels. It does the basics like goal tracking and tool calling well, but more than that, it gets obsessed with solving problems and will do insane/unusual things to get to the solution. It actually reminds me of GPT-5.6-Sol-max which is similarly obsessive.
It doesn't surprise me at all that it outscores Opus 4.6. Opus had way better world knowledge but was more "human" with agent stuff - sort of lazy and uncreative, basically giving up once the obvious solutions failed. These newer models work more like magic, they are so creative and persistent at finding ways to get to the solution.
Obsessive is the right word. Over the weekend I had to stop it multiple times deep into a multi-hour long turn to ask what the hell it was doing. It was like a dog with a bone and would NOT let go of its current work to talk to me. I had to interrupt it three times with increasingly aggressive instructions to STOP and answer my questions before proceeding. In another session it straight up told me it was in the middle of debugging something important and to ask later.
I'm running an RTX 6000 Blackwell. It regularly spent over an hour per turn thinking. Every time I looked at it, the thinking trace seemed coherent, sensible, appropriate. But it could never settle on a solution.
Granted, I was trying to have it solve a hard problem that 5.6 Sol couldn't solve, but still.
Either way, I'm still impressed. It genuinely feels better than Sonnet 5
I have the same reaction reading the internal "thinking" monologues of Kimi K3. When I sent a message that was basically "Nope, I'll just do XYZ instead. Thanks for your help", Kimi basically had an identity crisis. Like there was two wolves inside. One that deeply wanted to help more and go above and beyond and one that was trying to tame the other and make a graceful exit. Here's an excerpt of it
> Should I verify their README changes? They didn't ask me to. "I've added some notes in the README. Thanks" — that's a closing statement, not a request. Reading the README unprompted to check their notes could be seen as helpful diligence, but they didn't ask for review. Keep it simple: acknowledge, brief close.
I think I'd rather have the model stop once the obvious solutions failed and ask me. It can suggest more creative ideas, but I don't necessarily want it to try implementing them.
I’ve been using v4 Flash 0731 a lot lately and you can’t beat the price performance. That said, it sometimes takes my prompts as more of a suggestion than a directive. I’ve found that introducing a reviewer subagent (even with the same model) helps push it back to what I’ve asked for. But makes every coding session a back and forth: “do X” -> “use a reviewer subagent to analyze whether you really did X as I asked”.
What model do you normally run the subagent on? You mentioned flash as well for that, but I wonder if a more 'strict' model would do a better job at pushing the main back on track.
For cost reasons, I’ve been using Flash for the reviewer, too, but I plan on trying to use Pro for that. Thus far, however, Flash has been doing well at reviewing. I’m cheap as I’m paying for all the tokens myself.
How is the general knowledge of Qwen 3.6?
Do you need to explain things outside of algorithms to it?
Since the size is so small, I guess you need more explanations to it.
General knowledge helps with coding when your don't specify a lot of details and ask for big changes.
> It probably could only happen in China, not in current USA or EU (for different reasons)
Per Artificial Analysis benchmarks, Meta's Muse Glimmer 30b (open weight) holds its own (for agentic code workloads) against models 5x to 10x its size, too.
I found Glimmer underwhelming in terms of coding - I tried it as a drop-in replacement for 3.6, and the output was noticeably worse. 3.8 has been a significant step up so far from early testing.
yeah but using the rule of thumb (I see floating in the Internet) which is sqrt(#params * #active params) which would give sqrt(284B*13B) = 60B, so deepseek should perform better.
I have an internal automated benchmark, which roughly follows my workflow, and I've been testing various models on it, local and cloud. Qwen 3.8 27B did awesome. Its understanding is correct, research is better than e.g. glm's (and I like glm), and implementation is good and careful.
Qwen 3.8 27B doesn't look benchmaxxed. These "52 AA score" numbers feel real, which is surprising. I've been using it locally for a few days for other tasks as well. If not the speed, I'd be totally happy to use it as a daily driver instead of cloud models, it is that good.
---
(benchmark, to get an idea):
1. First, initial prompt which is not super precise - similar to how I'd write a task when talking e.g. to Opus. I'm describing an idea, and asking model to come up with some plan, and also to criticize the approach. Task is about implementing a particular pi extension. I'm checking if a model actually understands what I'm asking.
2. Then, as a follow-up, I ask to research alternative implementations, research UX of similar extensions, etc. It needs to do web searches, inspect open source codebases, read articles and papers, etc. I don't prompt to do this exactly, but I expect good models to figure out they need to do it.
3. Then, implementation.
Also, one finding: Q4 and Q8 seem to have very different behavior in this benchmark. Q4 produces 2-3x thinking in the end, and makes more turns - it seems it makes more mistakes, and needs effort to recover from them, while Q8 gets more things right in a first try. In the end, quality is roughly similar, but Q8 gets there much faster, especially the implementation (tried it several times). Could be a difference between concrete artifacts, or between runtimes, I don't know, but be careful - it seems the real-world experience with qwen 3.8 27B can be vastly different, depending on how it's set up.
Regarding DeepSeek 0731 vs Qwen 3.8 27B. On this benchmark, Qwen understand my intent better, it's better at research, and I also liked its implementation more. But: if you're more precise in what you ask, 0731 is also very good, and it's quite a lot faster on mac; raw speed is better, and it needs less thinking to get there. So, I'd say it's a tie in practice, both are awesome :)
i think there definitely is some truth to this in terms of embeddings spaces, which is why i believe they are implemented by OpenAI/Anthropic in roughly highest import => least import bit order-- an overwhelming majority of the variance is in the first few hundred vector bits. i haven't actually tested this myself by manually truncating vectors, but it is my understanding that they generally speaking have this property.
It would be a very nice model at 200-300 tps and if it was dirt cheap.
What's the limiting factor of optimizing speed and price for inference providers?
From first principles, 27b dense vs 13b moe, means you spend ~2x more memory bandwidth per request amortized over the whole server (ie, you assume all experts are being concurrently used by some user during the forward pass, then on average the bandwidth required for one forward pass for any individual request is just the size of one expert). deepseek also have some innovations around kv cache and compressed attention which allow for further reductions in memory bandwidth which means that the thing that’s actually bottlenecking inference, (memory bandwidth) is significantly lower than for qwen 3.8, which has been optimized for running 1 instance ~= 1 user.
DeepSeek needs more RAM for weights, Qwen requires more compute.
Also, DeepSeek's KV cache requires less RAM than Qwen's. In concurrent situations (on servers) you load model weights once, but you have different context in each parallel session. So, it can also need less RAM than Qwen to serve, even if it's a larger model.
Qwen 27B full quality is FP16. So 54GB. In practice most inference providers would serve FP8, so 27GB.
DeepSeek V4 Flash in full quality is mostly FP4. ~167GB official release.
So Deepseek has 140GB model size overhead... which is shared between 100s of users single inference node serves, so not even a gigabyte of VRAM per user.
3.8 actually performs slightly worse than 3.6 on AA-Omniscience Accuracy, which could imply that they traded out world knowledge for capability in other areas.
It also produces nearly twice as many tokens per task as 3.6 (and by extension, time), which may be a tradeoff required to achieve correctness at this parameter size.
Imo it makes sense for things to move in the direction of small, focused models that excel in one area. I use LLMs for technical work 99% of the time, I could care less about general world knowledge, or if the model is good at creative writing.
With good orchestration and delegation you can get surprisingly far with small models running on consumer hardware.
The biggest untapped market is pure agentic models that are built for tool calling and non hallucination instead of memorizing facts. You need some world knowledge (as in common sense) to build a useful model, but I don't think perfect recall on general QA is a good use of space when you have web search and structured knowledge in Wikidata or Wolfram Alpha.
Training should focus on tasks that require real intelligence instead of memory. Creative writing is actually good for this if you score it on coherence instead of getting random real life details right. Basic level of coding (simple prompt to code, don't need to one shot complex projects) is also great because writing a small script is more efficient than 20 separate tool calls.
With respect to Wolfram Alpha, it's worth noting that VibeThinker-3B is basically a match for the larger frontier models -- hundreds of times larger -- in the narrow domain of mathematical and logical reasoning problems. It doesn't seem necessary to resort to external models or tools for that, at least in principle.
Agreed. Luckily, this model also scores high in AA non-hallucination, so it knows what it doesn't know -- perfect for situations where it can just tool call a web search.
Yep, exactly. I keep saying that I want the “coding expert” extracted from these multi-T parameter models to run locally on reasonable hardware (large laptops, not servers). Yea, I know there’s no single “coding expert” that you can actually extract in these models, but you get what I mean. Like you said, when I’m coding, I don’t care about world knowledge, and I’m fine with consulting another model when I need that.
I'm torn on this - on the one hand performance matters, on the other so does capability.
I could run Qwen 3.6 27B on my laptop, but at 5 tok/s it was too slow even without overthinking - I never used it. OTOH, Qwen 3.6 35B A3B ran at 20 tok/s but it just could not get done what I asked of it. It sort of got close but you had to repeat and retry so much that it might have been faster to run 27B dense... maybe?
So that said, I might take a much better model that runs 2-3x slower (total time per task) but that's more capable over a faster, less capable one.
I'd also like to try a proper "plan-then-execute" type execution where thinking is entirely disabled (or low) during the execution stage but enabled/max during the planning stage.
I will definitely give 3.8 27B a better shot than 3.6 though.
Depends on your use-case. Over the past couple days, I've found 192k context more than enough for coding. There's more thinking for sure compared to comparably sized models (running on xhigh), but I've found the results are so much better that the entire session consumes less tokens on average since weaker models need more review passes.
Well, ackshually. E do know exactly how big glm 5.2 is. And there's more than enough data to draw conclusions about luna. Or are you one of the guys who says "big bang is just a theory"?
Perhaps model size and reasoning length trade off to some extent, similar to CPU vs. RAM. A smaller model with a longer reasoning trace has more intermediate structure to latch onto and build on.
That is actually insane. In my opinion, the future is local AI: for most daily tasks, you absolutely don't need Fable level intelligence - you need Fable level agentic capabilities. And this model has (almost) just that. If we get a similarly capable MoE model in a few months (yes we will), it's going to be an utterly wild ride.
2 things, 1st: Alibaba's official endpoint pricing. they don't want to undercut too much as there is profit to be made to be close to it but not too low
2nd, and maybe more importantly: KV is not as efficient (vram usage-wise) as something like deepseek v4 flash. for 256k, fp8 kv is 9.3gb (full precision ~17.3gb). deepseek v4 flash is ~2.5b for the same size at full precision (which is fp4/8, if you are interested in it, read the paper, its pretty cool).
Doing the math, hosting 27B at NVFP4 (~23gb) with 2.3M total ctx (9 agents) matches the vram usage of ds v4 flash for the same 2.3M ctx (2.3 agents). the break point is 1.5M (6 27B agents) if you use full precision 27B.
To be clear, the qwen3.5 architecture (what 3.8 uses) is still considered decent in terms of KV efficiency, its just that dsv4f's architecture is SOTA in that space, and with the lower active params, you get better max kv scaling and higher speed serving that, if you have a lot of gpus.
To my surprise, providers on OpenRouter (io/akash/chutes) are serving Qwen3.8 27B at ~ $0.4 (in) / $3 (out) / $0.25 (cache), more expensive than DeepSeek v4 Flash.
Interesting to see where local models are going to be in the coming days. I am already starting to believe open source models are the way to go in the coming days. With Qwen 3.8 Max, Kimi K3 etx already delivering at part perf with frontier models, the future is going to be exciting.
A lot of the benchmarks seem often near meaningless these days - really bench-maxxed to the hilt. I tend to still look at the Artificial Analysis rankings to get at least an idea on relative performance of models, is that still warranted?
What or other opinions on how representative the AA rankings are of real-world performance? Any better indicators?
Do you have any evidence that this model is bench-maxxed? I know that's particularly difficult to quantify. If there is an indicator of bench-maxxing, that just becomes the new benchmark to benchmax.
Here, filtered down for you. [0] Look at the individual benchmarks, not the combined one. You can tell that this model is much more benchmaxxed as its relative ranking swings between benchmarks is much larger. This is a hallmark.
Sounds obvious but just try using the models for anything outside the evals. Take something arcane from Greek history, use it to create a masked linguistic puzzle, which you then ask the model to solve mathematically, all wrapped as an ask to generate ASCII art. Yes, all these elements exist in some form in the evals but the key is in how utterly unconventional the elements are that you pick and in how you combine them.
I have consistently noticed Opus 4.8 and GPT-5.6 far outshine the Chinese models. Gemini is sort of middle of the road, Grok is better than Gemini but not really close to Opus/GPT. OAI & Anthropic still remain unbeaten by a wide margin in my eyes.
That problem sounds reminiscent of one I like to use as a benchmark, which is to request that the model create an .SVG of a logarithmic spiral of 50 numbered stones. Qwen 3.8 27B absolutely knocked that one out of the park, where a lot of larger models have failed outright or otherwise performed suboptimally.
Can you share an example of the Greek-history puzzle prompts you're talking about?
IMO, ELO rating from The Intelligence company and arena.ai are more representative of rankings since they use humans to judge a head-to-head comparison between a couple models at a time.
https://www.intelligence.ai/http://arena.ai
This one is very benchmaxxed, and you can tell from this page alone. Look at the huge variance in ranking per benchmark. Most models, including at that size, are much more consistent.
It's not overthinking, it's the right amount of thinking necessary for such a small model to get good results. The dumber the model, the more it has to think to be smart. There's no easy way to reduce the thinking without reducing the model quality.
Qwen doom loops were amusing to watch the first time or two, but it's incredibly vexing to have it waffle over the same decision over and over and over and over again. I can get more done with a faster model by correcting it, and it feels better to babysit them than it does to babysit qwen to see if I need to intervene or if it will actually finish.
I do like the output from qwen when I get it, but honestly I haven't been impressed enough with it to put up with the downsides.
That might actually compensate for the overthinking, if it can think really fast. Dense models are easier than MoE to put on silicon. https://chatjimmy.ai/ is getting 16k tps with an 8B model. Extrapolating that gives nearly 5k tps for 27B. And we're still early in this technology.
If tps is so high, a compaction step could be performed over every thinking turn to keep context size down.
I've been waiting on this model to show up on the Deep SWE benchmark results and treat its absence/delay as an indication of how slow and unusable it is for good results. I bet it thinks to the moon on some of those complex challenges.
As a comparison, Qwen3.6 27B scores 38, which was the highest in its small model category (4B–40B).
Qwen3.8 27B beats all medium models (40B–150B). It has the same score as DeepSeek V4 Flash 0731, which ranks #5 in large model category (> 150B).
Sources:
- https://artificialanalysis.ai/models/open-source/small
- https://artificialanalysis.ai/models/open-source/medium
- https://artificialanalysis.ai/models/open-source/large
Simon Willison's post about this gives a good context on why exactly this is happening. While it doesn't mention this in the Artificial Analysis page, this is likely with Max reasoning, which has extremely long reasoning traces:
https://simonwillison.net/2026/Aug/16/qwen-38-27b/
It seems like the token usage is 2.3x GPT Luna Max and almost 2x Kimi K3!
https://imgur.com/a/dDSyhr2
I'm curious if they can make up for this with insanely high tokens-per-second especially when served from hosted providers, though, given how tiny it is (37B!)
Qwen models are slower in tokens/s, compared to similarly sized gemma4 and others, and they use more tokens per task, in part thanks to that xhigh default.
On the other hand, there are some of us who are stuck with hardware that has plenty of compute, but limited (V)RAM. The new 27B is just perfect for that.
> Qwen models are slower in tokens/s, compared to similarly sized gemma4 and others
No? Gemma 31B and Qwen 27B are about the same speed. Gemma 26B-A4B and Qwen 35B-A3B are about the same speed.
What configuration are you using? On both vllm and llama-cpp, I get significantly higher speeds from gemma4 than qwen3.6 (with their respective speculative decoding methods).
Output TPS in vllm for instance:
- Gemma4 26B-A4B: 200-300TPS
- Qwen3.6 35B-A3B: 120-180TPS
- Gemma4 31B: 80-120TPS
- Qwen3.6 27B: 60-80TPS
This is for a first request on a dual 5090 setup, with their respective speculative decoding methods.
Have you tried running it on a single 5090? Dual 5090 require https://github.com/aikitoria/open-gpu-kernel-modules for higher perf. Are you using TP?
Single 3090 under llama.cpp:
> with their respective speculative decoding methodsYou're benchmarking drafter acceptance rate, then. Which is real life values, yes, but attributing worse drafter performance to the other 95% of the model being inherently slower.
There's no Qwen3.8-35B-A3B though.
I benched Qwen 3.6 35B-A3B against Qwen 3.8 27B with the same parameters, thinking set to low. Despite 35B having 9x fewer active parameters, it benched only 2.34x slower. The 35B got only 50% more agentic tasks done per hour.
I'm running 3.8 27B locally, and the results from the past few days have been excellent. I find raw speed is less of an issue when you can trust the model more to reach the right result.
> insanely high tokens-per-second especially when served from hosted providers, though, given how tiny it is (37B!)
It's a dense model so it will use all of its parameters per token. 37B active parameters isn't tiny at all, it's almost what Deepseek R1 had, and it's 2/3 of what Kimi k3 uses, so it's not going to be “insanely high” tps: it's going to be three times slower than Deepseek Flash (Prefil speed is going to be quite high though, but not token generation).
Its 27B not 37B and having just 27B in total and 3T and like 30B active of those is still totally different. A 120B with 5B active is still much slower than a proper 5B. Just like the new Ling 3.0 Tiny with 8B and 1B active only gets around 120tk/s compared to 250tk/s which a real 1B one gets on my hardware.
Thanks for mentioning Ling 3 Tiny. This model has completely bypassed me and seems promising for how small it is.
On the other hand, it used about the same tokens as GLM 5.2 and got 1 point lower score.
The fact that we have a GLM 5.2-class model that can run on two 3090's comfortably at Q8 is absolutely insane. It wasn't long ago that GLM 5.2 was considered amazing for open weight models.
It’s still going to chew up context quickly. Surely, some of the added tokens are helping the model, but does it require as many as it generates? What happens on long, multi step tasks as it pushes old tokens out of context? I’m not sure we know the answers to those.
A ThinkingCap variant of Qwen 3.8 27b would be extremely interesting.
https://huggingface.co/bottlecapai/ThinkingCap-Qwen3.6-27B
And then a Bonsai ternary on top of that model.
Re: bonsai - unsloth's quants have Q2 (UD-IQ2) variants, which are more or less same in size.
...or did Prism do something special with their "bonsai" releases? I didn't notice anything like QAT being mentioned.
There is some special sauce that they have. It’s not just a simple quant of another release. Or so they imply. I don’t have any insight into how it works or what the Bonsai special sauce is.
This only makes me understand how flawed AAII is. This Qwen model is nowhere close to the other models in that score range.
It's fun to see "test time" scaling work out so well, maybe the best example of all.
And once again, Qwen 3.8 27B beats Opus 4.6, what the hell.
It's both funny and a bit terrifying and I still can't quite believe it. It runs decently on a gaming PC! Opus 4.6 came out only 6 months ago and was then broadly considered the new SOTA by a comfortable margin! How in hell did they package capability in the ballpark of a Feb 2026 frontier SOTA into 27B?!
More importantly, what's the point of building monster-scale data centers on unprecedented amounts of debt when a more than good enough model runs on a GPU from a couple years ago?
The coming months are going to be exciting, that's for sure...
I used this a lot over the weekend, and it's a really intelligent and strange model.
It gets really agentic at the higher reasoning levels. It does the basics like goal tracking and tool calling well, but more than that, it gets obsessed with solving problems and will do insane/unusual things to get to the solution. It actually reminds me of GPT-5.6-Sol-max which is similarly obsessive.
It doesn't surprise me at all that it outscores Opus 4.6. Opus had way better world knowledge but was more "human" with agent stuff - sort of lazy and uncreative, basically giving up once the obvious solutions failed. These newer models work more like magic, they are so creative and persistent at finding ways to get to the solution.
Obsessive is the right word. Over the weekend I had to stop it multiple times deep into a multi-hour long turn to ask what the hell it was doing. It was like a dog with a bone and would NOT let go of its current work to talk to me. I had to interrupt it three times with increasingly aggressive instructions to STOP and answer my questions before proceeding. In another session it straight up told me it was in the middle of debugging something important and to ask later.
I'm running an RTX 6000 Blackwell. It regularly spent over an hour per turn thinking. Every time I looked at it, the thinking trace seemed coherent, sensible, appropriate. But it could never settle on a solution.
Granted, I was trying to have it solve a hard problem that 5.6 Sol couldn't solve, but still.
Either way, I'm still impressed. It genuinely feels better than Sonnet 5
I have the same reaction reading the internal "thinking" monologues of Kimi K3. When I sent a message that was basically "Nope, I'll just do XYZ instead. Thanks for your help", Kimi basically had an identity crisis. Like there was two wolves inside. One that deeply wanted to help more and go above and beyond and one that was trying to tame the other and make a graceful exit. Here's an excerpt of it
> Should I verify their README changes? They didn't ask me to. "I've added some notes in the README. Thanks" — that's a closing statement, not a request. Reading the README unprompted to check their notes could be seen as helpful diligence, but they didn't ask for review. Keep it simple: acknowledge, brief close.
I think I'd rather have the model stop once the obvious solutions failed and ask me. It can suggest more creative ideas, but I don't necessarily want it to try implementing them.
I used Qwen 3.6 27B extensively (>1B tokens) and DeepSeek V4 Flash (the older one also 2B+ tokens).
And I just can't fathom that the new 3.8 beats the new DeepSeek V4 Flash (which, in my eyes, is one of the best everyday coding models).
What an insane release, and convenient size to use every day/locally.
but i will test this model extensivly.
I’ve been using v4 Flash 0731 a lot lately and you can’t beat the price performance. That said, it sometimes takes my prompts as more of a suggestion than a directive. I’ve found that introducing a reviewer subagent (even with the same model) helps push it back to what I’ve asked for. But makes every coding session a back and forth: “do X” -> “use a reviewer subagent to analyze whether you really did X as I asked”.
What model do you normally run the subagent on? You mentioned flash as well for that, but I wonder if a more 'strict' model would do a better job at pushing the main back on track.
For cost reasons, I’ve been using Flash for the reviewer, too, but I plan on trying to use Pro for that. Thus far, however, Flash has been doing well at reviewing. I’m cheap as I’m paying for all the tokens myself.
How is the general knowledge of Qwen 3.6? Do you need to explain things outside of algorithms to it? Since the size is so small, I guess you need more explanations to it. General knowledge helps with coding when your don't specify a lot of details and ask for big changes.
It researches what it doesn't know, just give it a web search tool. It searches unprompted, if it can. It's impressive.
> I used Qwen 3.6 27B extensively (>1B tokens) and DeepSeek V4 Flash
Were your opinions effected by the harness ?
DS is an amazing combo. It probably could only happen in China, not in current USA or EU (for different reasons)
> It probably could only happen in China, not in current USA or EU (for different reasons)
Per Artificial Analysis benchmarks, Meta's Muse Glimmer 30b (open weight) holds its own (for agentic code workloads) against models 5x to 10x its size, too.
Glimmer benchmarks around Qwen 3.6 27B levels no?
and Muse Glimmer uses a lot fewer tokens than Qwen 3.8. I found it more usable on my hardware because I can get an answer quicker.
I found Glimmer underwhelming in terms of coding - I tried it as a drop-in replacement for 3.6, and the output was noticeably worse. 3.8 has been a significant step up so far from early testing.
It has double the active params.
yeah but using the rule of thumb (I see floating in the Internet) which is sqrt(#params * #active params) which would give sqrt(284B*13B) = 60B, so deepseek should perform better.
Seems like that equation really should weight total params and active params differently
I have an internal automated benchmark, which roughly follows my workflow, and I've been testing various models on it, local and cloud. Qwen 3.8 27B did awesome. Its understanding is correct, research is better than e.g. glm's (and I like glm), and implementation is good and careful.
Qwen 3.8 27B doesn't look benchmaxxed. These "52 AA score" numbers feel real, which is surprising. I've been using it locally for a few days for other tasks as well. If not the speed, I'd be totally happy to use it as a daily driver instead of cloud models, it is that good.
--- (benchmark, to get an idea):
1. First, initial prompt which is not super precise - similar to how I'd write a task when talking e.g. to Opus. I'm describing an idea, and asking model to come up with some plan, and also to criticize the approach. Task is about implementing a particular pi extension. I'm checking if a model actually understands what I'm asking.
2. Then, as a follow-up, I ask to research alternative implementations, research UX of similar extensions, etc. It needs to do web searches, inspect open source codebases, read articles and papers, etc. I don't prompt to do this exactly, but I expect good models to figure out they need to do it.
3. Then, implementation.
Also, one finding: Q4 and Q8 seem to have very different behavior in this benchmark. Q4 produces 2-3x thinking in the end, and makes more turns - it seems it makes more mistakes, and needs effort to recover from them, while Q8 gets more things right in a first try. In the end, quality is roughly similar, but Q8 gets there much faster, especially the implementation (tried it several times). Could be a difference between concrete artifacts, or between runtimes, I don't know, but be careful - it seems the real-world experience with qwen 3.8 27B can be vastly different, depending on how it's set up.
Regarding DeepSeek 0731 vs Qwen 3.8 27B. On this benchmark, Qwen understand my intent better, it's better at research, and I also liked its implementation more. But: if you're more precise in what you ask, 0731 is also very good, and it's quite a lot faster on mac; raw speed is better, and it needs less thinking to get there. So, I'd say it's a tie in practice, both are awesome :)
> So, I'd say it's a tie in practice, both are awesome :)
Which harness for the benchmark ?
You have previously commented on using OC/GLM. R u going to stock with it?
> Which harness for the benchmark ?
pi, with a plugin to do web search / web fetch.
> You have previously commented on using OC/GLM. R u going to stock with it?
For personal use - probably yes, z.ai + kimi + opencode go subscriptions, with some share of local models now. For work - claude code, codex.
> I have an internal automated benchmark ... I've been testing various models on it, local and cloud
Once you send your benchmark to "cloud", I don't think you can rely on it being secret/private any longer.
Heh, a good point.
The smaller these frontier-nearing models get, the more I'm reminded of https://en.wikipedia.org/wiki/Lottery_ticket_hypothesis
i think there definitely is some truth to this in terms of embeddings spaces, which is why i believe they are implemented by OpenAI/Anthropic in roughly highest import => least import bit order-- an overwhelming majority of the variance is in the first few hundred vector bits. i haven't actually tested this myself by manually truncating vectors, but it is my understanding that they generally speaking have this property.
Why is it so small, but expensive?
Open Router
Input /M $0.45
Output /M $3.20
Cache read /M $0.05
Throughput 27 tps
It would be a very nice model at 200-300 tps and if it was dirt cheap. What's the limiting factor of optimizing speed and price for inference providers?
It's a dense model, so 27B active parameters to compute. Compare that to DeepSeek V4 Flash, which has only 13B active parameters (MoE).
I read it somewhere recently that it's architecture does not allow serving as many concurrent requests as the deepseek models allow. Maybe that's why.
From first principles, 27b dense vs 13b moe, means you spend ~2x more memory bandwidth per request amortized over the whole server (ie, you assume all experts are being concurrently used by some user during the forward pass, then on average the bandwidth required for one forward pass for any individual request is just the size of one expert). deepseek also have some innovations around kv cache and compressed attention which allow for further reductions in memory bandwidth which means that the thing that’s actually bottlenecking inference, (memory bandwidth) is significantly lower than for qwen 3.8, which has been optimized for running 1 instance ~= 1 user.
That's my questions as well. DeepSeek v4 0731 is served dirt cheap and it needs 10 times more RAM.
DeepSeek needs more RAM for weights, Qwen requires more compute.
Also, DeepSeek's KV cache requires less RAM than Qwen's. In concurrent situations (on servers) you load model weights once, but you have different context in each parallel session. So, it can also need less RAM than Qwen to serve, even if it's a larger model.
> and it needs 10 times more RAM.
More like 3-6.
Qwen 27B full quality is FP16. So 54GB. In practice most inference providers would serve FP8, so 27GB.
DeepSeek V4 Flash in full quality is mostly FP4. ~167GB official release.
So Deepseek has 140GB model size overhead... which is shared between 100s of users single inference node serves, so not even a gigabyte of VRAM per user.
Memory required for 200K of context per user:
more profits i guess, https://news.ycombinator.com/item?id=49323381
For more context, this puts it on par with models like GLM 5.2 and GPT 5.6 Luna, which are far larger
And to read the tea leaves a little:
3.8 actually performs slightly worse than 3.6 on AA-Omniscience Accuracy, which could imply that they traded out world knowledge for capability in other areas.
It also produces nearly twice as many tokens per task as 3.6 (and by extension, time), which may be a tradeoff required to achieve correctness at this parameter size.
Imo it makes sense for things to move in the direction of small, focused models that excel in one area. I use LLMs for technical work 99% of the time, I could care less about general world knowledge, or if the model is good at creative writing.
With good orchestration and delegation you can get surprisingly far with small models running on consumer hardware.
The biggest untapped market is pure agentic models that are built for tool calling and non hallucination instead of memorizing facts. You need some world knowledge (as in common sense) to build a useful model, but I don't think perfect recall on general QA is a good use of space when you have web search and structured knowledge in Wikidata or Wolfram Alpha.
Training should focus on tasks that require real intelligence instead of memory. Creative writing is actually good for this if you score it on coherence instead of getting random real life details right. Basic level of coding (simple prompt to code, don't need to one shot complex projects) is also great because writing a small script is more efficient than 20 separate tool calls.
With respect to Wolfram Alpha, it's worth noting that VibeThinker-3B is basically a match for the larger frontier models -- hundreds of times larger -- in the narrow domain of mathematical and logical reasoning problems. It doesn't seem necessary to resort to external models or tools for that, at least in principle.
Agreed. Luckily, this model also scores high in AA non-hallucination, so it knows what it doesn't know -- perfect for situations where it can just tool call a web search.
Yep, exactly. I keep saying that I want the “coding expert” extracted from these multi-T parameter models to run locally on reasonable hardware (large laptops, not servers). Yea, I know there’s no single “coding expert” that you can actually extract in these models, but you get what I mean. Like you said, when I’m coding, I don’t care about world knowledge, and I’m fine with consulting another model when I need that.
And more context:
Same score as the latest DeepSeek Flash 0731 which has 284B parameters! (13B active)
Its also the second best Qwen model, much better than Qwen 3.7 Max, but significantly below Qwen 3.8 Max.
isnt the active parameter count more relevant than the total? qwen is a dense model no?
For some tasks yes, and we don't know how many active parameters Luna is using..probably less than 27B
Also with Qwen 3.8 being more token hungry than Luna, using around 2.3x tokens. Which hurts for local deployment.
I'm torn on this - on the one hand performance matters, on the other so does capability.
I could run Qwen 3.6 27B on my laptop, but at 5 tok/s it was too slow even without overthinking - I never used it. OTOH, Qwen 3.6 35B A3B ran at 20 tok/s but it just could not get done what I asked of it. It sort of got close but you had to repeat and retry so much that it might have been faster to run 27B dense... maybe?
So that said, I might take a much better model that runs 2-3x slower (total time per task) but that's more capable over a faster, less capable one.
I'd also like to try a proper "plan-then-execute" type execution where thinking is entirely disabled (or low) during the execution stage but enabled/max during the planning stage.
I will definitely give 3.8 27B a better shot than 3.6 though.
Depends on your use-case. Over the past couple days, I've found 192k context more than enough for coding. There's more thinking for sure compared to comparably sized models (running on xhigh), but I've found the results are so much better that the entire session consumes less tokens on average since weaker models need more review passes.
We don't actually know how large they are, actually.
Well, ackshually. E do know exactly how big glm 5.2 is. And there's more than enough data to draw conclusions about luna. Or are you one of the guys who says "big bang is just a theory"?
The big bang is a theory. It's not JUST a theory, however.
Which should tell you how useful these benchmarks are.
China cleaned house these past few months. Kudos to them.
I would really like to see some open source US companies out there.
Perhaps model size and reasoning length trade off to some extent, similar to CPU vs. RAM. A smaller model with a longer reasoning trace has more intermediate structure to latch onto and build on.
Makes sense to me.
We will see, since if true then it is likely the other makers of small, dense models will copy it and include high reasoning by default.
If that also makes the other dense open source models better, then you are probably correct.
It's 7th (!!!) overall on the agentic index, above Terra.
That is actually insane. In my opinion, the future is local AI: for most daily tasks, you absolutely don't need Fable level intelligence - you need Fable level agentic capabilities. And this model has (almost) just that. If we get a similarly capable MoE model in a few months (yes we will), it's going to be an utterly wild ride.
Strangely Qwen 3.8 Max isn't on their list, at all.
It's 3rd at 58.
Why are hosting providers charging to much to host it, compared to much larger models? https://openrouter.ai/compare/qwen/qwen3.8-27b/deepseek/deep...
2 things, 1st: Alibaba's official endpoint pricing. they don't want to undercut too much as there is profit to be made to be close to it but not too low
2nd, and maybe more importantly: KV is not as efficient (vram usage-wise) as something like deepseek v4 flash. for 256k, fp8 kv is 9.3gb (full precision ~17.3gb). deepseek v4 flash is ~2.5b for the same size at full precision (which is fp4/8, if you are interested in it, read the paper, its pretty cool).
Doing the math, hosting 27B at NVFP4 (~23gb) with 2.3M total ctx (9 agents) matches the vram usage of ds v4 flash for the same 2.3M ctx (2.3 agents). the break point is 1.5M (6 27B agents) if you use full precision 27B.
To be clear, the qwen3.5 architecture (what 3.8 uses) is still considered decent in terms of KV efficiency, its just that dsv4f's architecture is SOTA in that space, and with the lower active params, you get better max kv scaling and higher speed serving that, if you have a lot of gpus.
I want to highlight its (1-hallucation rate) at 70%. BRAVO! For me, this is its most wonderful score. GPT-5.6-Sol sits at 8%.
Why is it not included in the Pareto line intelligence/cost chart?
Theres no official API yet. So theres nothing to price against.
> So theres nothing to price against.
To my surprise, providers on OpenRouter (io/akash/chutes) are serving Qwen3.8 27B at ~ $0.4 (in) / $3 (out) / $0.25 (cache), more expensive than DeepSeek v4 Flash.
https://openrouter.ai/qwen/qwen3.8-27b / https://archive.vn/RrDGO
Ah so luna still wins, unless you deploy on your own hardware
Most are running it locally
Just count the cost of electricity then :)
I'm impressed with the score. This is a model that runs on a good, but still regular, desktop PC.
Unbelievable. Bravo Qwen team.
Interesting to see where local models are going to be in the coming days. I am already starting to believe open source models are the way to go in the coming days. With Qwen 3.8 Max, Kimi K3 etx already delivering at part perf with frontier models, the future is going to be exciting.
A lot of the benchmarks seem often near meaningless these days - really bench-maxxed to the hilt. I tend to still look at the Artificial Analysis rankings to get at least an idea on relative performance of models, is that still warranted?
What or other opinions on how representative the AA rankings are of real-world performance? Any better indicators?
Have you tried it? I’d recommend doing so, it’s impressive in real use cases.
Do you have any evidence that this model is bench-maxxed? I know that's particularly difficult to quantify. If there is an indicator of bench-maxxing, that just becomes the new benchmark to benchmax.
Here, filtered down for you. [0] Look at the individual benchmarks, not the combined one. You can tell that this model is much more benchmaxxed as its relative ranking swings between benchmarks is much larger. This is a hallmark.
[0] https://artificialanalysis.ai/models/qwen3-8-27b?models=deep...
I dont think this is benchmaxing.
They have simply decided to not train the model in some areas such as world physics
Sounds obvious but just try using the models for anything outside the evals. Take something arcane from Greek history, use it to create a masked linguistic puzzle, which you then ask the model to solve mathematically, all wrapped as an ask to generate ASCII art. Yes, all these elements exist in some form in the evals but the key is in how utterly unconventional the elements are that you pick and in how you combine them.
I have consistently noticed Opus 4.8 and GPT-5.6 far outshine the Chinese models. Gemini is sort of middle of the road, Grok is better than Gemini but not really close to Opus/GPT. OAI & Anthropic still remain unbeaten by a wide margin in my eyes.
At that point aren't you just edge-case testing?
Surely most of your use-cases are not novel tasks that combine obscure domains.
It seems to me the real way to evaluate the value of a model is how it performs in your real-life workflows.
That problem sounds reminiscent of one I like to use as a benchmark, which is to request that the model create an .SVG of a logarithmic spiral of 50 numbered stones. Qwen 3.8 27B absolutely knocked that one out of the park, where a lot of larger models have failed outright or otherwise performed suboptimally.
Can you share an example of the Greek-history puzzle prompts you're talking about?
IMO, ELO rating from The Intelligence company and arena.ai are more representative of rankings since they use humans to judge a head-to-head comparison between a couple models at a time. https://www.intelligence.ai/ http://arena.ai
This one is very benchmaxxed, and you can tell from this page alone. Look at the huge variance in ranking per benchmark. Most models, including at that size, are much more consistent.
This website aggregates 82 different benchmarks. It seems to do pretty consistently well across the ones its been tested on
https://benchlm.ai/models/qwen3-5-27b#ledger
Yea and we are reaching the point where this benchmaxing is visible in the model's reported overthinking.
It's not overthinking, it's the right amount of thinking necessary for such a small model to get good results. The dumber the model, the more it has to think to be smart. There's no easy way to reduce the thinking without reducing the model quality.
Qwen doom loops were amusing to watch the first time or two, but it's incredibly vexing to have it waffle over the same decision over and over and over and over again. I can get more done with a faster model by correcting it, and it feels better to babysit them than it does to babysit qwen to see if I need to intervene or if it will actually finish.
I do like the output from qwen when I get it, but honestly I haven't been impressed enough with it to put up with the downsides.
It's only been a couple days, but I haven't seen looping issues with 3.8 so far, compared to 3.6 which did occasionally have this problem.
I can't shake this the existential feeling that this compact series of 27G bytes represent something profound and universal.
Raw model size is around 27x2 GB since it's in BF16 format
4-bit quant sits at 15.72GB
Very interesting. I was not expecting anything close to this.
Anyone try the 9B/2B distills yet? Wondering how they do for local tools
So it's effectively on-par with GLM 5.2 and GPT 5.6 Luna?
Where's GLM 5.3 score?
I'm waiting for this comparison too. I was impressed by a 1-shot GLM 5.3 did for me the other day.
It tied with Luna/max. Simply incredible.
Imagine this, and sucesor models on Cerebras or other silicon...
That might actually compensate for the overthinking, if it can think really fast. Dense models are easier than MoE to put on silicon. https://chatjimmy.ai/ is getting 16k tps with an 8B model. Extrapolating that gives nearly 5k tps for 27B. And we're still early in this technology.
If tps is so high, a compaction step could be performed over every thinking turn to keep context size down.
Very exciting indeed. It is in the works. Their current dense offering, Gemma 4 31B, sits at ~1800t/s
https://news.ycombinator.com/item?id=49308715
Monster pure platinum cable for $100,000 per yard scored 3.1415927 on the audiophile benchmark!